It is currently Sun Jun 07, 2026 2:25 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 31 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Thu Mar 17, 2016 1:46 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
The throttle body helped a lot getting started from a stop and it highway speeds are held easier.
You may be able to have them tune for the bigger throttle body. Other programmers do that for the Wrangler.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Thu Mar 17, 2016 4:53 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Gageraid wrote:
The throttle body helped a lot getting started from a stop and it highway speeds are held easier.
You may be able to have them tune for the bigger throttle body. Other programmers do that for the Wrangler.


yep tried one for about 5000 miles, not impressed enough to actually buy one
Very little noticeable " butt dyno " feel IMO
I think its like the sugar pills some Dr's pass out :ROTFL:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Thu Mar 17, 2016 8:55 pm 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
tommudd wrote:
Gageraid wrote:
The throttle body helped a lot getting started from a stop and it highway speeds are held easier.
You may be able to have them tune for the bigger throttle body. Other programmers do that for the Wrangler.


yep tried one for about 5000 miles, not impressed enough to actually buy one
Very little noticeable " butt dyno " feel IMO
I think its like the sugar pills some Dr's pass out :ROTFL:


Well, butt dino works for me!

Talked to B&G on the phone this morning, their program is $399 + S&H.
The handheld is $499 + S&H

Not sure where I had the idea that they were only high $300's.

Oh well, I'll still end up with the best I can get.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Fri Mar 18, 2016 5:10 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
Any dyno or predictions of how much horsepower and torque it'll add?
Hypertech is 24 horsepower and 24 torque on regular fuel
and can be had for much less than B&G.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Fri Mar 18, 2016 5:38 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
B&G is a much better setup for sure

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Fri Mar 18, 2016 6:50 pm 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
Gageraid wrote:
Any dyno or predictions of how much horsepower and torque it'll add?
Hypertech is 24 horsepower and 24 torque on regular fuel
and can be had for much less than B&G.


Not sure of numbers, I've scoured their site and there are no numbers for dyno'd liberties.
After all, we are a very niche segment in the offroad world.

tommudd wrote:
B&G is a much better setup for sure


What is your experience with them, Tom?

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Fri Mar 25, 2016 1:55 am 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
Throttle arrived yesterday: Image

I open it up to find it damaged.

Image

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Thu Apr 21, 2016 1:41 am 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
I'm finally getting a return code for the defective part.
Safe to say I won't be using that particular eBay seller again.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Thu Apr 21, 2016 3:48 am 
Offline
LOST Newbie

Joined: Wed Feb 03, 2016 12:12 am
Posts: 9
Location: Arizona
Paypal is a wonderful thing, they take care of bad businesses like that. I had ordered some parts from a company, they sent me the wrong parts. Tried to contact them for a week with no success. Filed a complaint with paypal, the next day they were in contact with me to fix the situation.

_________________
2006 Jeep Liberty CRD
GDE Eco Tune, Weeks Kits Stg. 1 & 2, H.D.S. Model 001, Fumoto Valve,
EHM, 4.10 Ring & Pinion, OME Lift 790 front & 948 rear, Bilstein Rear Shocks,
JBA UCA, JBA strut & clevis spacers, JBA Y-Link Ext,
Extra rear isolators, Goodyear DuraTrac’s,
Enkei SR-6 wheels 16X7, Mobil 1 Turbo Diesel Truck, WIX’s 51515XP


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Tue Apr 26, 2016 9:38 pm 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
Part sent back, ordering a new 4.7 throttle body today.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
 Post subject: Re: 4.7L V8 Throttle Body with a TBS
PostPosted: Wed Apr 27, 2016 7:44 pm 
Offline
LOST Member

Joined: Tue Nov 13, 2012 5:04 am
Posts: 326
Location: Anchorage, AK
Ordered 08 Durango throttle body assembly.

_________________
OME 2.75" lift. JBA UCA's.
Flowmaster super 44.
BoulderBars. Home built stubby.

31X10.5 Duratracs
Yukon / Motive Gear 4.10's

Aussie Locker. Safari Snorkel.
ARB Diff Guard
Soft 8 - X7 - 4" BS


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 31 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com