check the 3M website. I seem to remember them having some solution for removing their tape.

from 3M's website: In general this is difficult to do unless removed shortly after application. The part should be heated to soften the adhesive and peeled to cut apart. Heavy residue can be removed with a hot knife and adhesive residue can be removed with a 3M™ Scotch-Brite™ Tape Removal Disc or solvent adhesive remover.

_________________
Ron


"There are few problems in life the liberal application of duct tape can't solve."

well i'm gunna try just using a utility knife, or some small knife i can find... i won't be trying it for awhile anyway b/c of finals...

Driver's Side:


Passenger's Side:


Both:


Very solid and well worth the money.

Too bad that Genuine Steel is out of business now...

_________________
Colin
LOST#85291
"Blue Bunny"
04 KJ Sport 3.7L AT 4x4
Steel IFS/DL&DTT/4.10s/Tow Pkg/Mopar-Rusty's-Skid Row skids&sliders/OME struts&springs/Rancho shocks/Terraflex bumpstops/Landy FRH/Gen Steel/Grabber AT2s/Spidertrax/Rockcrusher/Hella/Smittybilt XRC8/Bulldog wiring/NAPA brakes/JBA UCAs&spacers/Deka Intimidator

Cobolt, where did you buy these?

Nevermind, I reread your previous post. I also ordered mine from Jack Mikol but his add said Aries and I was sent Steelcraft. mount the same but have 4 cross bars instead of the 3 so things just don't look the same. Does anybody know if Aries and Steelcraft are the same? Do the Aries have 3 or 4 crossbars? I may need to send these back and try something else, Any pics of Maniks to be found?

_________________
Jason
----------