| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 1" rear spacer...new idea 3/4" http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=1020 |
Page 1 of 1 |
| Author: | the1jferg [ Tue Aug 09, 2005 9:37 am ] |
| Post subject: | 1" rear spacer...new idea 3/4" |
Does anyone make a 1" rear spacer that would interchange and work on liberty? |
|
| Author: | KJ04 [ Tue Aug 09, 2005 8:51 pm ] |
| Post subject: | |
You can add an extra upper rear rubber spring isolator from dealer for around $20.00 a pair. |
|
| Author: | the1jferg [ Wed Aug 10, 2005 1:09 am ] |
| Post subject: | would this work? |
Will these Wrangler Isolators work? http://www.jeepline.com/store/itemdetail.asp?ID=969992 If I can use that (above) and Rusty's 1/2 lift (levelers) for the front, This'll be good (for me)on my 02 prelow http://rustysoffroad.com/Merchant2/merc ... sus_kj_par I guess I'll run down to the dealer and sit the isolators from both vehicles side by side |
|
| Author: | the1jferg [ Thu Aug 11, 2005 10:39 pm ] |
| Post subject: | same |
f |
|
| Author: | the1jferg [ Thu Aug 18, 2005 10:44 pm ] |
| Post subject: | forget it |
Oh yeah, Daystar says that rear spacer won't work...I don't believe it. I also remember when they made a 1" liberty spacer early on. Too much trouble and like you folks are thinking, why go to the trouble unless its 2" plus I'm done |
|
| Author: | LostRenegade [ Tue Aug 30, 2005 10:53 pm ] |
| Post subject: | How about on an already lifted KJ |
How about on an already lifted Liberty? I have the RUSTY 2.5" suspension lift but I could use a little extra in the rear to balance out the look and to also give it a little extra in the rear. My camper bottomed out the stock suspension and nearly bottoms out the Rusty 2.5" lift. Could adding an addition 1" in the rear help or create problems? |
|
| Author: | f1paul [ Mon Sep 19, 2005 11:24 pm ] |
| Post subject: | |
just wondering if you got the wrangler isolators to work for you. i would also like to add just a little height to my kj |
|
| Author: | the1jferg [ Tue Sep 20, 2005 9:22 am ] |
| Post subject: | no |
No, daystar says: "its a diff coil winding pattern." I think it will work (everybody wants to make money). I remember when they offered a 1" lift early o for the liberty and I believe this is the same. Since I'm swapping axles because of this PowerCraps No-slip I'm just going to give in and buy the (KJ) spacers and cut them down to the thickness I want. ( I like throwing money away) That bumper sticker that says: "insanity has replaced reason in modification of this vehicle" is true with me. I'm already in it for so much $$ now that I'm going to spend until I achieve the vision I started with. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|