Has anyone mounted their Hi-lift to the stock roof rails with crossbars? Of course pictures, parts lists, and detailed descriptions are appreciated. I liked the storage compartment mounting...........but I can't afford to lose anymore interior space; wife and three kids and all!

I've got less than two weeks left until Crozet. Still need to mount the Hi-Lift, extinguisher, install the JKS discos and raise the rear another 1/2".

Just finished putting the All Js SuperSkid II in, so now the armor is complete.

Mutt, you never stop working on your libby do you? You always have a list of something to do.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

I find it inspiring.

_________________
Matt B.

05 Limited CRD. Bought it new. 112k on the clock now.

GDE Eco-tune, rear differential drain plug (drilled and tapped the pumpkin), transmission pan drain plug, Fumoto oil valve, fuel filler neck restriction removed, front hitch, Hayden fan clutch, Sears P1 battery since 08, Mobil 1 5w40, 5 volt glow plugs, DIY timing belt at 109k

Well, it keeps me out of the bars, trouble, and keeps me at home.

If you remove the stock jack from under the back seat a normal size Hi Lift will slide right in...under the seat...without the base attached of course.
Then just add a couple of bungies so it does not rattle.

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph

I have the 60" Hi lift and I u-bolt it to the Renegade tupperware roof basket. Seems to work pretty good, but causes the plastic to rattle a bit. I am looking for a metal roof basket.

_________________
LostRenegade - Lost # 477
2003 Jeep Liberty Renegade - Silver
Mopar Skids, Skid Row Tranny Skid, Boulder Bars, Frankenlift II, 60" Hi-Lift Jack, K&N 6x9 Air Filter, Magnaflow, Dertoit Locker, 245/75R16 BF Goodrich All Terrains, Al's A-Arms

You can't be married then, because that sentence when used to explain all the time you work on your jeep is not humanly possible.

_________________
WWW.ROCKLIZARDFABRICATIONS.COM

I keep my 48"-er under the back seat too.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

Wait...that didn't sound right at all......

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

i dont have any experience with this so u'd have to try it, but u might could put it length wise on top of the kj and bunjie it , or u-bolt it to one of the bars, just an idea!!!!

_________________
Drop what your doin, and go drive your jeep!!!!
03 Jeep Liberty Limited
4X4

A couple of U-Bolts does the trick with the Jeep Cross Rails. If you only have the side rails, I'd say under the back seat is your best bet.

One thing I did do is get rid of that silly cotter pin that holds the foot on, drilled the holes on the foot a little larger, and picked up one of those pins with the integrated loop to keep it on (can't find a pic of it). Makes taking the foot on and off a lot easier.

_________________
2008 Unlimited Rubicon - 3.5" AEV/Nth lift - 35" MT/R with Kevlar - AEV Wheels - York OBA
2008 Patriot - Fuel Saver

Is this a High Lift mounted on the spare? Looks convenient if it is.

_________________
Dave

'06 CRD Limited, Lt. Khaki, MOPAR Slush Mats/Skids, DrawTite Front Hitch, Mag Lite, Yakima Bars, Thule Bike Rack, Fumoto, ORM, 245/70 Revo 2

Wish list: Lift, Boulder Bars, Something Bigger in the Front and Back, More Lights

Yes it is. THat is Ted K. from KJ WEST.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal