Mutt, you never stop working on your libby do you? You always have a list of something to do.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Hi-Lift mounting? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=11790 |
Page 1 of 1 |
| Author: | Mutt [ Sat Aug 26, 2006 6:39 pm ] |
| Post subject: | Hi-Lift mounting? |
Has anyone mounted their Hi-lift to the stock roof rails with crossbars? Of course pictures, parts lists, and detailed descriptions are appreciated. I liked the storage compartment mounting...........but I can't afford to lose anymore interior space; wife and three kids and all! I've got less than two weeks left until Crozet. Still need to mount the Hi-Lift, extinguisher, install the JKS discos and raise the rear another 1/2". Just finished putting the All Js SuperSkid II in, so now the armor is complete. |
|
| Author: | Jeepjeepster [ Sat Aug 26, 2006 6:54 pm ] |
| Post subject: | |
Mutt, you never stop working on your libby do you? You always have a list of something to do.
|
|
| Author: | Goglio704 [ Sat Aug 26, 2006 6:56 pm ] |
| Post subject: | |
I find it inspiring.  
|
|
| Author: | Mutt [ Sat Aug 26, 2006 7:03 pm ] |
| Post subject: | |
Well, it keeps me out of the bars, trouble, and keeps me at home. |
|
| Author: | DarbyWalters [ Sat Aug 26, 2006 8:38 pm ] |
| Post subject: | |
If you remove the stock jack from under the back seat a normal size Hi Lift will slide right in...under the seat...without the base attached of course. Then just add a couple of bungies so it does not rattle. |
|
| Author: | LostRenegade [ Sun Aug 27, 2006 9:36 pm ] |
| Post subject: | |
I have the 60" Hi lift and I u-bolt it to the Renegade tupperware roof basket. Seems to work pretty good, but causes the plastic to rattle a bit. I am looking for a metal roof basket. |
|
| Author: | Rock Lizard [ Sun Aug 27, 2006 10:00 pm ] |
| Post subject: | |
Mutt wrote: Well, it keeps me out of ...trouble, and keeps me at home.
You can't be married then, because that sentence when used to explain all the time you work on your jeep is not humanly possible. 
|
|
| Author: | JJsTJ [ Sun Aug 27, 2006 10:26 pm ] |
| Post subject: | |
I keep my 48"-er under the back seat too. |
|
| Author: | JJsTJ [ Sun Aug 27, 2006 10:30 pm ] |
| Post subject: | |
JJsKJ wrote: I keep my 48"-er under the back seat too.
Wait...that didn't sound right at all......
|
|
| Author: | gone_jeepin [ Sun Aug 27, 2006 11:00 pm ] |
| Post subject: | |
i dont have any experience with this so u'd have to try it, but u might could put it length wise on top of the kj and bunjie it , or u-bolt it to one of the bars, just an idea!!!! |
|
| Author: | pixeldzn [ Sun Aug 27, 2006 11:18 pm ] |
| Post subject: | |
A couple of U-Bolts does the trick with the Jeep Cross Rails. If you only have the side rails, I'd say under the back seat is your best bet. One thing I did do is get rid of that silly cotter pin that holds the foot on, drilled the holes on the foot a little larger, and picked up one of those pins with the integrated loop to keep it on (can't find a pic of it). Makes taking the foot on and off a lot easier. |
|
| Author: | Cowcatcher [ Sun Aug 27, 2006 11:58 pm ] |
| Post subject: | |
Is this a High Lift mounted on the spare? Looks convenient if it is. 
|
|
| Author: | JJsTJ [ Mon Aug 28, 2006 7:41 am ] |
| Post subject: | |
Yes it is. THat is Ted K. from KJ WEST. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|