LOST JEEPS :: View topic - Extra upper sping isolator for 1/2" of lift in the rear

Any one have first hand experiance with this? Is there any way the extra spacer could slip out or do they snug up together? I already have a set of 3/4" front spacers on the way from rusty’s but I was still trying to figure out how to lift the rear without spending much money, I just read Eddo's reply about this in a post about getting an extra 10mm of lift, I know its not much of a lift but but stock KJs sit way too low but I don't have the extra money to sink into a real lift and new tires this sounds like a great budget boost lift with no draw backs, (i.e. no OTT problems)

Thanks for the advice, I went ahead a purchased a set today from my local dealer for about $22 including tax, they'll be here tuesday so im gonna go ahead and install the front spacers this weekend and the rears look like they'll take about 5 minutes to install :-)

I'll post before and after picts to see if theres any noticable difference lol

Alamogordo, but the guys from base call it Alamagetto but this my be a backwater town but at least its not Clovis/Cannon LOL, I really don't mind it here its a nice area.

If you go to a longer shock.....The spring can slip out.

I HAVE DONE IT !!!!!

Author:	Universeman [ Wed Aug 30, 2006 3:16 pm ]
Post subject:	Extra upper sping isolator for 1/2" of lift in the rear
Any one have first hand experiance with this? Is there any way the extra spacer could slip out or do they snug up together? I already have a set of 3/4" front spacers on the way from rusty’s but I was still trying to figure out how to lift the rear without spending much money, I just read Eddo's reply about this in a post about getting an extra 10mm of lift, I know its not much of a lift but but stock KJs sit way too low but I don't have the extra money to sink into a real lift and new tires this sounds like a great budget boost lift with no draw backs, (i.e. no OTT problems)

Author:	LostRenegade [ Wed Aug 30, 2006 6:07 pm ]
Post subject:
I used a 1/2" spacer that I got from All J products. They don't show them on their web site, but they do sell them. I used two on each side to get an inch of additional lift. There is no chance they can slide out. The upper bump stop will go through the center of the spacer. I need to do something similar with the front. Let me know how those 3/4" spacers from Rusty work.

Author:	moose_1978 [ Wed Aug 30, 2006 7:04 pm ]
Post subject:
You can also buy a set of factory rear isolators and stack it on the original one.I did this and it makes a big differance for about $30 set.

Author:	LostRenegade [ Wed Aug 30, 2006 7:24 pm ]
Post subject:
I paid about $30 a set for the All J spacers.

Author:	Eddo [ Wed Aug 30, 2006 8:02 pm ]
Post subject:	Re: Extra upper sping isolator for 1/2" of lift in the
Universeman wrote: Any one have first hand experiance with this? Is there any way the extra spacer could slip out or do they snug up together? I already have a set of 3/4" front spacers on the way from rusty’s but I was still trying to figure out how to lift the rear without spending much money, I just read Eddo's reply about this in a post about getting an extra 10mm of lift, I know its not much of a lift but but stock KJs sit way too low but I don't have the extra money to sink into a real lift and new tires this sounds like a great budget boost lift with no draw backs, (i.e. no OTT problems) I've done it on 2 KJs and they snug up just fine. Plus I know some other people on the board that have tried it and it works fine. The upper spring isolaters actually give about a little more than a 1/2" You can get them straight from the dealer for a total of 20 dollars for both isolators. I can take a picture if you really want.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Extra upper sping isolator for 1/2" of lift in the rear http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=11913	Page 1 of 1

Author:	Universeman [ Thu Aug 31, 2006 1:30 am ]
Post subject:
Thanks for the advice, I went ahead a purchased a set today from my local dealer for about $22 including tax, they'll be here tuesday so im gonna go ahead and install the front spacers this weekend and the rears look like they'll take about 5 minutes to install I'll post before and after picts to see if theres any noticable difference lol

Author:	Eddo [ Thu Aug 31, 2006 7:05 am ]
Post subject:
Universeman wrote: Thanks for the advice, I went ahead a purchased a set today from my local dealer for about $22 including tax, they'll be here tuesday so im gonna go ahead and install the front spacers this weekend and the rears look like they'll take about 5 minutes to install I'll post before and after picts to see if theres any noticable difference lol Cool, keep us update.

Author:	Universeman [ Fri Sep 01, 2006 5:58 pm ]
Post subject:
Finally lifted! The Rusty's 3/4" spacers worked perfectly. In fact, it looks to me like they yielded more than 1" of lift overall, but I didn't take before and after measurement. When I was finished installing the front lift, I started to wonder how my 2" terraflex rear spacers would work. So in they went, and boy am I impressed with the results. Now having said that, I don't know if this would work with a non-CRD KJ, but I don't see why not. I bought the 2" terraflex budget boost before I learned about the problems with OTT lifts, so I don't know whether or not the rear 2" spacer is for sale separately, but I would say it's around $75 or so. The installation went smoothly. I spent about 5 hours on the front (it would have been less, but I spent about 1.5 hours traveling to the base auto skills center to use their very nice spring compressor to install the spacers--a really good spring compressor is a must as it took alot of force to compress those CRD springs with the spacers). I spent less than 2 hours on the rear, and for a homemade spring compressor, I used a small ratcheting cargo strap--worked great. Regarding my original question (which is now a moot point), I found a great budget boost that won’t damage anything. Here's some before and after shots

Author:	Eddo [ Fri Sep 01, 2006 8:42 pm ]
Post subject:
Universeman, where you located in new mexico. I use to live in Albuquerque.

Author:	Universeman [ Fri Sep 01, 2006 11:45 pm ]
Post subject:
Alamogordo, but the guys from base call it Alamaghetto but this my be a backwater town but at least its not Clovis/Cannon LOL, I really don't mind it here its a nice area.

Author:	Eddo [ Sat Sep 02, 2006 7:04 am ]
Post subject:
Universeman wrote: Alamogordo, but the guys from base call it Alamagetto but this my be a backwater town but at least its not Clovis/Cannon LOL, I really don't mind it here its a nice area. Cool. Only be down to Alamogordo twice. I know what you mean by a backwater town, but its not bad. I really loved Albuqueque when I was there. Would go back in a heartbeat if I could.

Author:	the1jferg [ Sat Sep 02, 2006 12:46 pm ]
Post subject:
If you go to a longer shock.....The spring can slip out. I HAVE DONE IT !!!!!

Author:	Jeepjeepster [ Sat Sep 02, 2006 5:32 pm ]
Post subject:
the1jferg wrote: If you go to a longer shock.....The spring can slip out. I HAVE DONE IT !!!!! These go overtop the sping, not under it the1jferg... What is your ground clearance at the lowest point under the front skid? Be sure to measure it when the jeep is on level ground. If its nose up then it will be alittle high.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/