LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Will this setup work? (new to KJ's)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=12206		 Page 1 of 1
Author:  jeepnjill [ Fri Sep 08, 2006 9:51 am ]
Post subject:  Will this setup work? (new to KJ's)
I had a TJ for 8 years and just bought a KJ last month
After reading tons of articles and threads, I want to make sure this setup will work for my 2006 KJ.

2.5" Rusty's Suspension Lift
265/75R16 Trxus M/T on stock 16" wheels

Thanks!
Author:  kolesy [ Fri Sep 08, 2006 9:55 am ]
Post subject: 
I would say you will hav etons of rubbing. I have that lift and i have 245/75 mtrs and had rubbing in the front on the pinch weld and the bottom of the front bumper.
Author:  Talon 1 [ Fri Sep 08, 2006 10:05 am ]
Post subject: 
Agreed, especially with those tires. They are sweet looking tires though.
Author:  priell3 [ Fri Sep 08, 2006 10:17 am ]
Post subject: 
This chart can give you an idea of the results, but use it only as a guide. Every combo is different.

Image
Author:  Jeepjeepster [ Fri Sep 08, 2006 10:22 am ]
Post subject: 
I would keep it around 245/75/16. :wink:
Author:  AdirondacKJ [ Fri Sep 08, 2006 12:26 pm ]
Post subject: 
Would an all terrain 245/75/R16 be much different than a mud terrain?
Author:  AZScout [ Fri Sep 08, 2006 12:32 pm ]
Post subject: 
Unfortunately, the TrXus do not come in 245/75 16's. I had that setup and on stock 16x7 rims you will rub the plastic liner in the rear and have constant rubbing in the front. I got some Rubicon wheels and it is now much better but in both cases you will have to do some serious trimming. Ive got some pics here if it helps.

Dave

http://www.flickr.com/photos/13657537@N00/
Author:  Jeepjeepster [ Fri Sep 08, 2006 12:41 pm ]
Post subject: 
AdirondacKJ wrote:
Would an all terrain 245/75/R16 be much different than a mud terrain?


Yes, a mud terrain would be much better in mud. The All terrain will be a good all around tire. I find the general grabbers to be alittle slick in the rain. Ive yet to try and fishtail, but they didnt take the corners as good as I would like. I drive alittle fast, so it takes a good tire to make me happy.
Author:  gone_jeepin [ Fri Sep 08, 2006 2:42 pm ]
Post subject: 
AZScout wrote:
Unfortunately, the TrXus do not come in 245/75 16's. I had that setup and on stock 16x7 rims you will rub the plastic liner in the rear and have constant rubbing in the front. I got some Rubicon wheels and it is now much better but in both cases you will have to do some serious trimming. Ive got some pics here if it helps.

Dave

http://www.flickr.com/photos/13657537@N00/


do you have the rear lca's?
Author:  AZScout [ Fri Sep 08, 2006 2:50 pm ]
Post subject: 
No...it would be nice but I currently do not have them. The rubbing was happening in the front of the rears, but also on the lining. If you look at the picture http://www.flickr.com/photos/13657537@N00/5340869/ you will see the "shiny" part of the liner where it rubbed. The rubicons got rid of that.
Author:  gone_jeepin [ Fri Sep 08, 2006 2:56 pm ]
Post subject: 
yea the lca's would move those back tires a little further back, but ur jeep looks awesome either way!!!
Author:  Jeepjeepster [ Fri Sep 08, 2006 3:07 pm ]
Post subject: 
Thats a big crack. :shock: I would love to take my jeep through that!! :D
Author:  AZScout [ Fri Sep 08, 2006 6:46 pm ]
Post subject: 
Thanks! I hope the trimming pics were helpful. The "crack" was a lot of fun. All the more reason to vist MOAB!
Author:  Bullet [ Fri Sep 08, 2006 11:07 pm ]
Post subject:  Re: Will this setup work? (new to KJ's)
jeepnjill wrote:
I had a TJ for 8 years and just bought a KJ last month
After reading tons of articles and threads, I want to make sure this setup will work for my 2006 KJ.

2.5" Rusty's Suspension Lift
265/75R16 Trxus M/T on stock 16" wheels

Thanks!


Congradulations and welcome!!
Author:  Matt400 [ Sat Sep 09, 2006 12:56 am ]
Post subject: 
I just did that lift on my 03 and 265/75's would be horrible IMO.
I went with 245/75's because I wanted a 6 ply tire where the 245/70 4 plys would have been a better fit.

I have trimmed things up a bunch, added 3/8" to the Clevis and still get a little rub that would be gone for sure with a different front bumper. My rims are 16x8 with 5.5 bs and I see now that a stock wheel 16x7 and 5.5 bs would allow for less arc and clear the size I have even better.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/