Hey

Has anyone got access to the instructions on how to install a winch on the ARB bumper? The bumper came with a printed sheet with pictures which I've managed to lose

Any help definately appreciated

Most bumpers will have four holes drilled thru a mounting plate for the winch...and a vertical mounting point for the fairlead (rollers or slide if synthetic rope)

_________________
Founder of L.O.S.T.
2006 CRD Sport
Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph

I may be wrong...but doesn't the ARB need a 'foot first' installation? With the mounting points for the winch on the front along with the mounts for the fairlead?

The way it's recommended in the instructions is to lay the winch on a table and lower the bull bar onto it. Bolt up the winch and fairlead, and then install the bull bar onto the mounting brackets that are bolted onto the frame.

If you need the instructions let me know, I have them on my work computer. I can email them to you. Let me know
Its not hard to do, did mine in about an hour including drilling the holes.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

If you could mail them that would be great...pm'd you my address

Robby_T

I will send them out tomorrow as soon as I hit the office!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited