| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Fender Clips http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=14233 |
Page 1 of 1 |
| Author: | RQuarte [ Tue Nov 07, 2006 9:44 am ] |
| Post subject: | Fender Clips |
So i managed to rip off my sport fender on a tree, long story. The fender is fine but i totaled all but two of the clips holding the fender on. Would i be able to get these amazingly engineered clips at the dealership or an auto parts store? |
|
| Author: | Jeepjeepster [ Tue Nov 07, 2006 11:43 am ] |
| Post subject: | Re: Fender Clips |
RQuarte wrote: So i managed to rip off my sport fender on a tree, long story. The fender is fine but i totaled all but two of the clips holding the fender on. Would i be able to get these amazingly engineered clips at the dealership or an auto parts store?
haha, amazingly engineered? Are you being funny? Id say you could get them at a dealer. It may be one of those things where youve got to buy the entire part just to get the clips though.. 
|
|
| Author: | RQuarte [ Tue Nov 07, 2006 7:57 pm ] |
| Post subject: | Re: Fender Clips |
Quote: haha, amazingly engineered? Are you being funny?
Of course. I've looked for them on mopar sites with no results, or maybe im not seeing something. 
http://www.newmoparparts.com/mopar-parts.htm |
|
| Author: | CaKJFreedom [ Tue Nov 07, 2006 8:45 pm ] |
| Post subject: | |
Time for screws, duct tape and zip ties? |
|
| Author: | 4wdParakeet [ Tue Nov 07, 2006 9:08 pm ] |
| Post subject: | |
Quote: Time for screws, duct tape and zip ties?
Don't forget the bailing wire. Parakeet |
|
| Author: | FLJeep [ Tue Nov 07, 2006 9:20 pm ] |
| Post subject: | |
SOMEWHERE on here there is the part number for those clips. The stealership won't have a clue where to find it. Maybe try a search for said clips, you might get lucky |
|
| Author: | mikekj_cda [ Tue Nov 07, 2006 11:07 pm ] |
| Post subject: | |
I would PM Elwenil, he's a parts advisor at a Chrysler Jeep dealership and LOST member, of course. I bet if you ask real nice he could look up the part # for you  . It's a plastic rivet, there has been some past threads about them.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|