LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Sry for this, but I need pics kinda quick!!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=14284		 Page 1 of 1
Author:  Jeepjeepster [ Wed Nov 08, 2006 5:05 pm ]
Post subject:  Sry for this, but I need pics kinda quick!!
I need some pics of the skink sliders on a 2002-2004 liberty. Not just from the side, but looking up under the jeep/slide/good detailed pics.

Thanks guys! :wink:
Author:  spoonplugger1 [ Wed Nov 08, 2006 5:22 pm ]
Post subject: 
The Rock Liz site I believe has some taken from all kinds of angles.
Author:  Jeepjeepster [ Wed Nov 08, 2006 5:49 pm ]
Post subject: 
spoonplugger1 wrote:
The Rock Liz site I believe has some taken from all kinds of angles.


Yup, Ive emailed all of those. Ive got a guy making me some as we speak and he was needing some more pics. He has a libby at his work and was confused where to take all the measurements..

He needs to see a pic of where the sliders mount on the frame/pinch welds..

Thanks though!
Author:  JJsTJ [ Wed Nov 08, 2006 6:10 pm ]
Post subject: 
Imitation is the sincerest form of flattery. I suppose Marty will be flattered though his wallet probably won't appreciate it.
Author:  Jeepjeepster [ Wed Nov 08, 2006 6:15 pm ]
Post subject: 
Im not imitating the sliders. Im just making something that will protect the sides of my jeep and needed something to go by. Im getting these made for around $150. Alot cheaper than anyone could of gotten them to my door for. :wink:
Author:  Tokyojoe [ Wed Nov 08, 2006 8:39 pm ]
Post subject: 
....but, will they be as strong?
Author:  Jeepjeepster [ Wed Nov 08, 2006 11:13 pm ]
Post subject: 
Tokyojoe wrote:
....but, will they be as strong?


If I want them to be.. :wink: Thats what cool about getting stuff custom made..

So much for the quick pics.. :x
Author:  USAFCOP [ Thu Nov 09, 2006 12:36 am ]
Post subject: 
Honestly, if your custom guy was anygood, he would not need the pictures. Before Marty made the skinks, the only ones he had seen were my home brew ones, and frankly he laughed at them...
Author:  Jeepjeepster [ Thu Nov 09, 2006 8:18 am ]
Post subject: 
USAFCOP wrote:
Honestly, if your custom guy was anygood, he would not need the pictures. Before Marty made the skinks, the only ones he had seen were my home brew ones, and frankly he laughed at them...


Haha, this is the first time hes ever done something like this. He had never worked nor been around jeeps and never made a part like this before. Im fairly sure that Marty has made these for xj's along time.

Anyway, thanks for the awesome help guys.. :roll: Seems like Im getting crap b/c im trying to save some money and not buy from someone on the board.. IF I had the money I wouldnt have a problem buying from someone on here. BUT I DONT!!! :evil:
Author:  Maximum Carnage [ Thu Nov 09, 2006 9:09 am ]
Post subject: 
Marty it’s time to fill out and turn in thos patent applications.
Author:  06BlueLimited [ Thu Nov 09, 2006 11:39 am ]
Post subject: 
What is the problem, the guy is just trying to improve his jeep and save a buck. I don't think he is trying to steel a design, he is just looking for help. I thought that is what this board was about? He wasn't even the one that said something about looking at Marty's. :roll:
Author:  JJsTJ [ Thu Nov 09, 2006 12:08 pm ]
Post subject: 
06BlueLimited wrote:
What is the problem, the guy is just trying to improve his jeep and save a buck. I don't think he is trying to steel a design, he is just looking for help. I thought that is what this board was about? He wasn't even the one that said something about looking at Marty's. :roll:


Actually, he asked about the skink sliders which are Martys/Rock Lizards design.
Author:  Jeger [ Thu Nov 09, 2006 12:20 pm ]
Post subject: 
I dont see any problem with getting ideas from someone elses design. People do it all the time. It would be crazy to set out to make something and not take the time to study what has been done already. Even if they were patented I dont think it would be illegal to make a set for yourself, as long as you are not copying and reselling them for a profit.
Author:  06BlueLimited [ Thu Nov 09, 2006 12:22 pm ]
Post subject: 
Ok, I missed that, but I still don't see a problem with saving a buck. People use similar designs of products all of the time, don't see a problem with that. I doubt that they will be identical anyway.
Author:  Maximum Carnage [ Thu Nov 09, 2006 5:13 pm ]
Post subject: 
Maximum Carnage wrote:
Marty it’s time to fill out and turn in thos patent applications.


Personally I don't see a problem just messing around. GO ahead and and get that KJ as rock solid as possible.
Author:  Jeepjeepster [ Thu Nov 09, 2006 5:21 pm ]
Post subject: 
Even if he did have a patent, I wouldnt give a crap. i can make whatever I want to for my jeep. :roll:

What a waste this thread was. :?
Author:  allyrand [ Thu Nov 09, 2006 5:56 pm ]
Post subject: 
Quote:
What a waste this thread was.





yes you are right about that
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/