| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| SS1 install problem http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=14916 |
Page 1 of 1 |
| Author: | AndySRT [ Mon Nov 27, 2006 1:33 am ] |
| Post subject: | SS1 install problem |
problem: I can only get 2 bolts in. the hole where you drill threw the cross member doesnt line up at all on the drivers side. It is about 3/4 of a inch away from that hole. the outrigger does not fit on the passenger side. where it bolts to the front cross member theres a hole on the side of the skid where it bends and has no hole. theres only one hole for the front engine skid to bolt back up. Ill take pictures tommorw when its light out. sorry if this doesnt make sence till then. Andy |
|
| Author: | chefdab [ Mon Nov 27, 2006 12:06 pm ] |
| Post subject: | |
Not sure about the rest of it, but you have to notch out the front skid hole a little larger to make it fit with the transmission skid. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|