problem: I can only get 2 bolts in. the hole where you drill threw the cross member doesnt line up at all on the drivers side. It is about 3/4 of a inch away from that hole. the outrigger does not fit on the passenger side.
where it bolts to the front cross member theres a hole on the side of the skid where it bends and has no hole. theres only one hole for the front engine skid to bolt back up. Ill take pictures tommorw when its light out. sorry if this doesnt make sence till then.


Andy

_________________
daily driver:06 midnight blue jeep liberty CRD sport.
mods: CRD frakenlift, 245/75R16 grabbers on Soft 8's,All J interior rack,front hitch,custom intake,ORM, EHM GDE hot tune
141k miles

Not sure about the rest of it, but you have to notch out the front skid hole a little larger to make it fit with the transmission skid.

_________________
David
Bel Air,Md
2003 KJ Patriot Blue Sport w/mods R.I.P.
2005 Wrangler Unlimited not so stock
L.O.S.T. #082670
http://www.cardomain.com/ride/803306
http://www.cardomain.com/ride/2399643
More mods planned than money.
-----------------

"Roads, where we're going we don't need roads."