LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

B.A.L.L.S.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=15377		 Page 1 of 1
Author:  keep the peace [ Fri Dec 08, 2006 5:27 pm ]
Post subject:  B.A.L.L.S.
Question for Al:

I was just wondering how the progress with your lift is going? I haven't read anything on it lately and im interested to see how things are coming along!!! :D Im considering the frankenlift at the moment, but im always up to see what a fellow new jerseyian has developed and might consider going with that!!!


*note to moderators* im not sure where exactly i should have posted this so feel free to move it anywhere, and didn't want to just PM Al because i thought others might be interested as well :twisted: *
Author:  CaKJFreedom [ Fri Dec 08, 2006 8:37 pm ]
Post subject: 
I don't quite get the subject line but ok. Hope all will want more informatoin on balls and read it. :wink:
Author:  Joe Jeeper [ Fri Dec 08, 2006 8:48 pm ]
Post subject:  Balls
Big ALs Lift System.
Author:  keep the peace [ Fri Dec 08, 2006 9:07 pm ]
Post subject:  Re: Balls
Joe Jeeper wrote:
Big ALs Lift System.


Forgot the Liberty :wink:
Author:  Sport [ Fri Dec 08, 2006 10:21 pm ]
Post subject: 
I like your avatar.
Author:  DarbyWalters [ Sat Dec 09, 2006 12:37 am ]
Post subject: 
CaKJFreedom wrote:
I don't quite get the subject line but ok. Hope all will want more informatoin on balls and read it. :wink:


Problem is the guys can only have two...and the girls get all the balls they want...
Author:  Jeepjeepster [ Sat Dec 09, 2006 1:06 am ]
Post subject: 
DarbyWalters wrote:
CaKJFreedom wrote:
I don't quite get the subject line but ok. Hope all will want more informatoin on balls and read it. :wink:


Problem is the guys can only have two...and the girls get all the balls they want...


:lol:

Good one.. 8)
Author:  JJsTJ [ Sat Dec 09, 2006 9:36 am ]
Post subject: 
DarbyWalters wrote:
CaKJFreedom wrote:
I don't quite get the subject line but ok. Hope all will want more informatoin on balls and read it. :wink:


Problem is the guys can only have two...and the girls get all the balls they want...

:lol:
Now I don't feel so bad about my comment in the Moab attendee thread. :wink: :twisted:
Author:  Jeepin Al [ Sat Dec 09, 2006 10:07 am ]
Post subject: 
You know, someone else thought of the line, I think I took it and modified it a little, and I thought about it, and said "you know that is me completly not PC". And I do get in trouble for it once in a while! Big Al's Liberty Lift System is still in the design stage, seems all the componets work, but as ideas come forth while sitting in the throne room, I keep redesigning and making things better!

But any way, quick reader digest.....I need to figure out how to make the mods in the front bolt in and the rear I have all the parts I need to re-make my tri - link but this time with an axle truss. This rear set up will be bolt in and adjustable. I also need to relocate the rear upper spring pads, which I think I will do with the Nth TJ units.

Once I am done...I promise to write it up and post pictures on the web site. This year has been crazy, my real job just was (for family channel)....BAD. I am starting a new job in Pa. some 20 mins from my home and my garage mecca. I am hoping the coming year will return to some stage on normal, and I can start working on the KJ again along with my hot rod project. I am looking for a Willys too...think Rat Patrol!

I rather be in my garage to the wee hours of the morning than behind my desk at work.

Al

PS ANYONE HAVE A SPARE 8.25 I CAN BUY, WITH DISCS?
Author:  dirtykj [ Sat Dec 09, 2006 6:21 pm ]
Post subject: 
How much would BALLS cost compared to SFA (13k give or take) ?
Author:  Jeger [ Mon Dec 11, 2006 12:24 pm ]
Post subject: 
Hey Al, Have you looked into the "CRD's have lower diff mounts" thing?
Author:  eggwhite93 [ Mon Dec 11, 2006 4:04 pm ]
Post subject: 
Hey Al if you need some more testers i am down here in South Jersey and would be interested in being a test dummy. not for free of corse. I would pay for the lift.
Author:  Jeepin Al [ Mon Dec 11, 2006 5:03 pm ]
Post subject: 
Once I get everything done, I will post the updated costs. I did post a while back on the costs, I will difg that post up and up date it. As for test mules, as soon as I know mine is 90 to 100% safe, most likely will can figure out how to get these things a couple of more KJ's. The problem is right now is the time. I spent yesterday resealing my transfer case, (about 4-5 hours still not finished). It was leaking real bad, but that is another story.

Just to relocate the upper a-arms downward, it was $1500. I did not do it because of the time involved, I had Jeff Daniels Jeep do it for me. They are into modifing, not just bolting parts in.

The rear truss in next, and with all experimentation, the steering rack is shot, as is my steering rod. Experimental wounds I caused developing the lift, not from the lift itself :oops:

Al
Author:  keep the peace [ Mon Dec 11, 2006 7:02 pm ]
Post subject: 
well if you ever need to do some testing after tweaking and cant get to paragon or rausch, just let me know and we can swing by stag hills, there's fun for all sizes there! 8)
Author:  ajday [ Mon Dec 11, 2006 9:36 pm ]
Post subject: 
the '02 Liberties actually have Donkey balls - actually I believe they are driveline stabilization weights (or something like that). I don't have any pictures right now :lol:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/