I got a steering column today that included the stalk for use with the factory fog lights.

Does anyone know if the wireing is inplace on all libertys so that I can just hook up the new stalk and some factory fogs or will I need to get a wireing harness as well?

If anyone has pics, or can point me to some, that show what the fog plugs look like, I can probably figure out from them if I have the plugs or not.

Thanks!

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!

Not sure if your does but my 03' did not when I bought Oem style foglights since anything else would not fit and then figured I could pick up an wire harness for about $15-$20 but was told by the dealer it was $158.00 And I told him it was about 100% markup and left and went to the junk yard and got two GM connecters and wired them to the headlights and they work fine. It is too Bad Chysler continues to Rip people off by over charging on the parts.

_________________
Dave T. 1995 XJ, 2003 KJ with a 2" daystar lift with an K-N filter with procomp 7032 black wheels with Yoko's on them, Maga-flow exhaust, Hid headlights and HID foglights and Led lights mounted on a bracket near the tank for backing up and led lamps elsewhere also an ARB in the rear and a detroit truetrac in frt.

Gris,

Check out these two Mopar Fog Light installation manuals:

2002: http://site.justforjeeps.com/guide/82207998.pdf

2005: http://site.justforjeeps.com/guide/8229413.pdf

For the 2002, it looks like you solder the wires into the existing wiring and crimp them into the existing connectors.

_________________
Jeep Liberty Wikibook
# cd /home/fuzzymuzzle.com