who sells / makes them?

ive been looking around for one but cant find any real info


if this is an unnecessary thread please just delete and PM me the info

thanks a bunch!

_________________
1998 Audi A4 1.8tQ

1990 Mazda Miata

"Remember when the platform was sliding into the fiery pit and I said 'Goodbye' and you were like 'NO WAY' and then I was all 'I was just pretending to murder you'? That was great."

This is the post that started it all, but basically you have to buy a standard 2 1/2 inch collar either steel or aluminum and then modify it - the differential is about 2 5/9" -
don't tighten the collar down - you'll stress the bearings - you just want a reinforcement - I did finger tight with blue locktight.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=5187&highlight=diff+collar

This was the group buy on the aluminum collar
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=9691&highlight=diff+collar

The reason the group went with aluminum was to minimize galvanic corrosion. you can accomplish the same thing on the steel by painting the inside of the ring.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

i remember about someone making aluminum specific ones for our jeeps

or am i wrong?

_________________
1998 Audi A4 1.8tQ

1990 Mazda Miata

"Remember when the platform was sliding into the fiery pit and I said 'Goodbye' and you were like 'NO WAY' and then I was all 'I was just pretending to murder you'? That was great."

Wishfull thinking. I wouldn't do steel (painted or not) if you live anywhere near road salt.

_________________
2005 Liberty Sport CRD, Lt Khaki, sunroof

Thankful to now be an EX-CRD owner.

Yep, it's the one ATXKJ listed under group buy thread.

_________________
Nanette

03 Freedom with some neat stuff done to it that I learned about here.