Frankenlift front bump stop prb

gastip · **Posted:** Fri Feb 09, 2007 11:24 pm

I'm having the new version of Frankenlift problem where the ball joint makes contact with the spring. I've read a couple of threads about people fashioning a bumpstop extension (which I plan to do as well).

I noticed on my front springs that the bumpstop is actually turned to the rear of the jeep so that only the very corner of the bump stop makes contact. Is there a way to rotate that back out so that the bumpstop is directly facing the brake rotor?

Also, in one of the afore mentioned threads someone mentioned that All J's might have bumpstop extensions they can send to you. Does anyone know if this is true? Otherwise I was going to hack up a rubber mallet to make the extended bumpstop.

Thanks in advance for any info!

Eddo · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 1214

See this thread.

Also there are two good links in the thread.

Jeepjeepster · **Posted:** Sat Feb 10, 2007 1:00 am

Eddo wrote:

See this thread.

Also there are two good links in the thread.

I think you forgot the link eddo. :wink:

JJsTJ · **Posted:** Sat Feb 10, 2007 8:21 am

Callup All J and talk to them about it. They do have a bumpstop that can be added to the spacer or at least I think that is the current fix. Best bet is to call them or email them about it.

Eddo · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 1214

Jeepjeepster wrote:

Eddo wrote:

See this thread.

Also there are two good links in the thread.

I think you forgot the link eddo. :wink:

http://www.lostjeeps.com/forum/phpBB3/vie ... 313#134313

gastip · **Posted:** Sun Feb 11, 2007 5:34 pm

Thanks everyone,

I'm going to try twisting the spring while I've got an email off the All Js.

Appreciate the help!

Frankenlift front bump stop prb

Who is online