Tell me what you think.

BCool · **Posted:** Wed Feb 14, 2007 3:14 pm

I just had my spacers put in my strut assembly and they are 2 inch spacers up front? Is that going to be ok on the springs? It is an old daystar I guess before the front spacer was 2 inches. If anybody has any ideas to what might happen I'm all ears, I had to shell out 100 bucks to get them put in I hope they don't need to be changed

raceinfan · **Posted:** Wed Feb 14, 2007 4:47 pm

it'll make the springs just stiffer thats all seeins they'll be bunched up but you'll be fine

BCool · **Posted:** Wed Feb 14, 2007 4:58 pm

will I end up with more lift than the 1.5 inch spacer? Will I get 2.5" our of it or 2.0" I think the 1.5" nets 2.0" so does it stand with reason that I should get 2.5"

raceinfan · **Posted:** Wed Feb 14, 2007 5:08 pm

if I'm correct you will end up with more lift but not sure how much more

JJsTJ · **Posted:** Wed Feb 14, 2007 6:31 pm

The only problem I had on my old Daystar was coil bind on hard bumps.

BCool · **Posted:** Wed Feb 14, 2007 6:53 pm

Whats Coil bind? Did you do the top plates too with them? I'm wondering If i should?

raceinfan · **Posted:** Wed Feb 14, 2007 6:59 pm

when the spacer is installed your springs get squished so they won't have the full up & down motion, so when you hit a hard bump the spring can't compress anymore & only has so much down travel

Tell me what you think.

Who is online