| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tell me what you think. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=17674 |
Page 1 of 1 |
| Author: | BCool [ Wed Feb 14, 2007 3:14 pm ] |
| Post subject: | Tell me what you think. |
I just had my spacers put in my strut assembly and they are 2 inch spacers up front? Is that going to be ok on the springs? It is an old daystar I guess before the front spacer was 2 inches. If anybody has any ideas to what might happen I'm all ears, I had to shell out 100 bucks to get them put in I hope they don't need to be changed |
|
| Author: | raceinfan [ Wed Feb 14, 2007 4:47 pm ] |
| Post subject: | |
it'll make the springs just stiffer thats all seeins they'll be bunched up but you'll be fine |
|
| Author: | BCool [ Wed Feb 14, 2007 4:58 pm ] |
| Post subject: | |
will I end up with more lift than the 1.5 inch spacer? Will I get 2.5" our of it or 2.0" I think the 1.5" nets 2.0" so does it stand with reason that I should get 2.5" |
|
| Author: | raceinfan [ Wed Feb 14, 2007 5:08 pm ] |
| Post subject: | |
if I'm correct you will end up with more lift but not sure how much more |
|
| Author: | JJsTJ [ Wed Feb 14, 2007 6:31 pm ] |
| Post subject: | |
The only problem I had on my old Daystar was coil bind on hard bumps. |
|
| Author: | BCool [ Wed Feb 14, 2007 6:53 pm ] |
| Post subject: | |
Whats Coil bind? Did you do the top plates too with them? I'm wondering If i should? |
|
| Author: | raceinfan [ Wed Feb 14, 2007 6:59 pm ] |
| Post subject: | |
when the spacer is installed your springs get squished so they won't have the full up & down motion, so when you hit a hard bump the spring can't compress anymore & only has so much down travel |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|