LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Just ordered a Rusty's coil kit
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=17853		 Page 1 of 1
Author:  Billy Baldone [ Mon Feb 19, 2007 5:32 pm ]
Post subject:  Just ordered a Rusty's coil kit
I was just curious as to what else I need to install this kit. I am having a local 4x4 shop do the install.
Also if 31x10.5x15 tires will fit with no modifications. I also have 1.25'' spacers on there
Thank you
Billy
Author:  raceinfan [ Mon Feb 19, 2007 6:28 pm ]
Post subject: 
as long as they have a spring compressor there's nothing else needed for the install..good choice on the lift :)
Author:  2006KJSPORT4x4 [ Mon Feb 19, 2007 6:37 pm ]
Post subject: 
I would look forward to rubbing along the pinch weld and the rear of the front bumper perhaps...other then that you should be ready to go...
Author:  Science_Guy [ Mon Feb 19, 2007 7:12 pm ]
Post subject: 
I would also picked up:
6 2" conduit lock nuts from the hardware store $0.99x3 for the clevis lift (nuts are optional) and
4 upper rear spring isolators from the Jeep dealership $12x4 for the rear isolator lift

Adding a clevis lift on the front and rear isolators on the back add more lift you will really appreciate later on.

Here is a complete write up on the entire installation: http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=15164

Enjoy your new Rustys lift. I sure have enjoyed mine :)
Author:  Maximum Carnage [ Tue Feb 20, 2007 12:20 am ]
Post subject: 
Science_Guy wrote:
I would also picked up:
6 2" conduit lock nuts from the hardware store $0.99x3 for the clevis lift (nuts are optional) and
4 upper rear spring isolators from the Jeep dealership $12x4 for the rear isolator lift

Adding a clevis lift on the front and rear isolators on the back add more lift you will really appreciate later on.

Here is a complete write up on the entire installation: http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=15164

Enjoy your new Rustys lift. I sure have enjoyed mine :)



Nice freaking write up. I'm hopefully getting in on the group buy on the KJ Country forum.
Author:  LiLredLibby [ Tue Feb 20, 2007 12:31 am ]
Post subject:  Re: Just ordered a Rusty's coil kit
Billy Baldone wrote:
I was just curious as to what else I need to install this kit. I am having a local 4x4 shop do the install.
Also if 31x10.5x15 tires will fit with no modifications. I also have 1.25'' spacers on there
Thank you
Billy


I've heard that they don't make a 15" wheel that will fit the KJ.May ought to check around before you buy wheels,I'm not really sure.

Ron
Author:  tjkj2002 [ Tue Feb 20, 2007 12:39 am ]
Post subject: 
Some poeple on this forum are running 15" rims on there KJ's.Alloy 15" won't work but steel 15"s will with the correct BS.
Author:  Billy Baldone [ Tue Feb 20, 2007 6:14 am ]
Post subject: 
I am currently running a 15'' ECCO wheel from a TJ they fit fine with spacers.
The extra width gives it a very stout stance.
I still need a definate answer on 31'' tires.
Author:  Edwin [ Tue Feb 20, 2007 3:39 pm ]
Post subject: 
Billy Baldone wrote:
I am currently running a 15'' ECCO wheel from a TJ they fit fine with spacers.
The extra width gives it a very stout stance.
I still need a definate answer on 31'' tires.


The tires will rub. A little? A lot? I don't know, but they will rub.
Author:  littlejon [ Tue Feb 20, 2007 7:32 pm ]
Post subject: 
i am runing 30/9.50/15 on 15x8 american eagle wheels with 4 ince back space and they scrub the out side fender i tried on a set of 31/10.50 and couldnt turn
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/