LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

265-70-16 looks like a good idea ...pict anyone ??
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=18117		 Page 1 of 1
Author:  JEEPAOLIC [ Tue Feb 27, 2007 9:15 pm ]
Post subject:  265-70-16 looks like a good idea ...pict anyone ??
Hi everyone! posted here too to get maximum view...
time to remove winter tires is near and when doing some calls for prices , seller gave me numbers....a bfg at in 245-75-16 will be 30.5 hight and 9.8 width and I know It will fit well cause its the size of my winter tires and I have not removed the pinch weld... but the man gave me the idea of a 265-70-16 mesuring about 30.7 hight and 10.6 width(a little less on a stock 7 or 7.5 large wheel he said) so it looks like a good idea, just .2in higher and 1/2 -5/8 larger.
I think with 1.25 wheel spacer it will fit pretty well and will not harm gearing more than 245's since its just .2in more high, because I think 245-75-16 do harm the vehicule at highway speed a little.

so tell me what you guys think about this!
have to go
bye
Éric

ps: the jeep has 2.5 rusty coil and 1/4 clevis
Author:  TDI4BY [ Wed Feb 28, 2007 12:06 am ]
Post subject: 
I was also wondering about that size. I really want 235/85 16's though.
Author:  SRotblat [ Wed Feb 28, 2007 1:16 am ]
Post subject: 
265/70 Revos
Image
Image
Author:  TDI4BY [ Wed Feb 28, 2007 1:48 am ]
Post subject: 
Any rub? Do you have wheel spacers?
Author:  JEEPAOLIC [ Wed Feb 28, 2007 10:47 am ]
Post subject: 
thanks for pict, look large, I'm mostly sure you have spacer ?? how do these tires go ? does it affect power much ??
thanks

if you could post a side picture it would be great
Author:  SRotblat [ Wed Feb 28, 2007 11:46 am ]
Post subject: 
No spacers. They rub on the fog light door on hard turns but not enough to the point that I've ever cut away any of the plastic or even cut off/pounded down the pinch weld.

There is certainly a bit of strain around 55-60mph, though I'd think any larger tire would do it. I have no problem cruising the highway at 80-85mph regularly.

I'll see about getting some other angles...thats all I've got hosted at the moment.
Author:  JEEPAOLIC [ Wed Feb 28, 2007 4:02 pm ]
Post subject: 
thanks a lot for infos
so with 1.25 spacer the tire will be just pass the flare..
cool
Author:  FastTRX [ Wed Feb 28, 2007 4:54 pm ]
Post subject: 
SRotblat wrote:
No spacers. They rub on the fog light door on hard turns but not enough to the point that I've ever cut away any of the plastic or even cut off/pounded down the pinch weld.

There is certainly a bit of strain around 55-60mph, though I'd think any larger tire would do it. I have no problem cruising the highway at 80-85mph regularly.

I'll see about getting some other angles...thats all I've got hosted at the moment.

What lift do you have? I'm guessing either a Rustys coil or Frankenlift. Very nice looking KJ...I really like how the tires fill out the wheel wells.
Author:  SRotblat [ Wed Feb 28, 2007 5:16 pm ]
Post subject: 
ya sorry about that, its Rusty's 2.5" coil lift
Author:  N / A [ Wed Feb 28, 2007 7:14 pm ]
Post subject: 
I have a rustys 2.5 coil lift and 255 70 16s and they rub on full lock
Author:  2006 KJ [ Wed Feb 28, 2007 7:24 pm ]
Post subject: 
i just got in my 265/75/16 BFG k/o's today!! i payed 791.60 for all 5....... and the frankenlift was just ordered.. so i'll let you know very soon. I have spidertrax wheel spacers now.. because i'll need them for the 265's. if you dont have them i believe it will rub on the sway bar.. but that's just what i've read on here not from experience. besides that.. at full flex i've heard they'll pop off the rear flare but bumpstops can correct that. Go for them! the bigger the better! :D

this might help you out...

http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=6357

unixxx posted a great paragraph one that page that explains everything very nicely.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/