I think it's 12 x 1.75 pitch - just like the TJ's
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What size bolts for front Skid Plate http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19452 |
Page 1 of 1 |
| Author: | Hauntedyards [ Sun Apr 08, 2007 12:25 pm ] |
| Post subject: | What size bolts for front Skid Plate |
I picked up a used front skid plate and I'm wondering if anyone knows what size bolts I need to mount it... what size are the factory nuts? |
|
| Author: | callaway [ Sun Apr 08, 2007 1:12 pm ] |
| Post subject: | |
The nutzerts for the trans/tranny skid can take 3/8-16 bolts. perhaps the engine holes are the same? |
|
| Author: | USPLibby [ Sun Apr 08, 2007 5:06 pm ] |
| Post subject: | |
it's actually metric, 10mm to be exact. other standard bolts will eventually strip out taking it on and off. 3/8" = 0.375" 10mm = 0.4" I forget which thread pitch for the 10mm but if you take one of the bolts out of the transfercase to a Home Depot or OSH, they usually have a bolt/thread finding jig to test the bolts for size. |
|
| Author: | Neatus [ Sun Apr 08, 2007 10:37 pm ] |
| Post subject: | |
Just order the skid plate bolts from the dealer. It will b cheap and right. |
|
| Author: | JeepinMaxx [ Sun Apr 08, 2007 11:32 pm ] |
| Post subject: | |
I think it's 12 x 1.75 pitch - just like the TJ's
|
|
| Author: | humptyjumped [ Mon Apr 09, 2007 1:20 am ] |
| Post subject: | |
JeepinMaxx wrote: I think it's 12 x 1.75 pitch - just like the TJ's
This is what I just used on the weekend to put on my rear tow hook. Shares some of the threaded holes for the gas tank skid plate .... MUST be 12 x 1.75 for the rest too |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|