Just wondering what kits can handle the weight of an ARB....

_________________
Neo Film + Video
http://www.neofilm.tv

2004 3.7L KJ
BFG AT's
ARB Bull Bar
Frankenlifted
Hella 500's
Mopar Skids

Any lift kit using the Old Man Emu (OME) HD or Mopar CRD springs should handle the weight fine. My OME HD Frankenlift only dropped around 1/2" after I installed the ARB bull bar and Warn M8000 winch (steel cable). If you own a CRD, you might want to use custom springs to handle the extra weight of the diesel engine.

_________________
Jeep Liberty Wikibook
# cd /home/fuzzymuzzle.com

http://www.lostjeeps.com/forum/phpBB3/vie ... 896#191896

_________________
It may be that your only purpose in life is to serve as a warning to others.

06 CRD Sport
Built 5/11/06
Jeep Green
Rocklizard diff cover
V6 Airbox

If you have a CRD, All J's has the new OME custom 500 lb. rate front coils now for the Frankin lift.

_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354

Nick's Pics & Mods click here: http://www.cardomain.com/ride/531173
http://www.survivaltopics.com/forums/

yes OME heavy dutys only way to go

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

OK, ok

I almost have my head wrapped around it....

Sooo.... which lift kits use OME or CRD springs?

Just the frankenlift?

_________________
Neo Film + Video
http://www.neofilm.tv

2004 3.7L KJ
BFG AT's
ARB Bull Bar
Frankenlifted
Hella 500's
Mopar Skids

Or if you are not looking for the "full" frankinlift treatment just get you some OME HD's
also depending on your milage you may want to replace the struts while you are at it
We only have 2 lifetd KJ in my part of the state and both are '03's with ~ 45k and both needed new struts at 36K thus both got lifted

I dont have the Frankenlift, just the OME Heavy dutys, Rancho struts and small clevis lift with the ARB. I pieced it together with springs/struts from AllJs, rear Ranchos from Summit Racing. Ride is great, no sag after over 24000 miles.

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Humptyjumped

There will be a few extra sets of CRD front springs available in the next few weeks because of the new Frankenlift. I bet you could get a good deal. I promissed mine to Troysterr if he helped me put on my Frankenlift. I would ask around and see who is putting on one of the new Frankenlifts.

_________________
2005 CRD , Moab Rims, 245/75/16 Goodyear M/T
RL rear bumper, TMJ Front bumper, Frankenlinft,
*TOTALED*

1985 Mitsubishi Pickup SP 2.3 Turbo Diesel Watercooled turbo,4D56 ported head,
12" Suspension Lift with JK Rubicon axles, Elockers, 5.13's, Fox coilovers, Atlas 5.0, Rock Lizard supersliders

1996 Lexus LX450 -locked and lifted-