HD rear OME springs will give around 2.5in of lift. You can add upper spring isolators to gain a 1/2 per isolator. You can order those from the dealership.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ome springs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19739 |
Page 1 of 1 |
| Author: | bavfc3364 [ Mon Apr 16, 2007 10:51 pm ] |
| Post subject: | ome springs |
I'am looking to upgrade my springs but i want the lift in the rear still. I currently have the daystar lift and would like to go to a taller spring in the back. Who has a spring that will give a 2.5 to 3 inch lift without a big spacer? |
|
| Author: | Jeepjeepster [ Tue Apr 17, 2007 9:54 am ] |
| Post subject: | |
HD rear OME springs will give around 2.5in of lift. You can add upper spring isolators to gain a 1/2 per isolator. You can order those from the dealership.
|
|
| Author: | bavfc3364 [ Tue Apr 17, 2007 6:48 pm ] |
| Post subject: | |
thanks i just ordered the diesel front springs they are cheap. i will try the rear springs |
|
| Author: | Video Guy [ Wed Apr 18, 2007 10:06 am ] |
| Post subject: | |
Will CRD front springs fit a gas KJ? I have 1.5" Daystar spacers up front and would like another half-inch of lift to level things out. I might get pre-lowered '02 springs, but I'm concerned about them being five years old now and settled, not full height any more. |
|
| Author: | bavfc3364 [ Wed Apr 18, 2007 7:44 pm ] |
| Post subject: | |
They will fit they are just a heavier spring rating due to engine weight. I have the daystar lift and those springs wil enable me to put a bumper on. |
|
| Author: | f1paul [ Sat Apr 21, 2007 12:01 am ] |
| Post subject: | |
wonder if anyone out there has swapped in crd springs into a gasser just to firm up the ride and roll, a bit. (but with no lift.) Like to know of anyones experience or opinion on this i was thinking of doing just this, along with rustys 1/2" strut spacers up front and an isolator for the rear. i think those 255/65/17's will fit then. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|