| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lift Height With ARB Bull Bar and Winch http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=1980 |
Page 1 of 1 |
| Author: | Topper 1 [ Sat Sep 17, 2005 1:01 pm ] |
| Post subject: | Lift Height With ARB Bull Bar and Winch |
For you guys running the ARB Bullbar with winch, what lift system are you using and what lift height are you getting up front? |
|
| Author: | Ed [ Sun Sep 18, 2005 9:20 am ] |
| Post subject: | |
I'm running what amounts to the Suburban 3.5" SuperRide kit, although I had the OME kit and the Suburban extra bits installed separately. I've got the MD springs and a Magnum 9K winch in the ARB bar (plus a load of other stuff) and I get about 3" of lift at both the front and rear. One of the future upgrades I'm planning is to swap in the HD springs and replace the steel winch cable with X-Line. I'm sure the difference would be millimeters though. |
|
| Author: | Tuco [ Sun Sep 18, 2005 4:54 pm ] |
| Post subject: | |
OME 2 - 2 1/2 lift losing about 3/4" up front with the ARB and Warn 8000 running X-line. I could probably gain that 3/4" back if I switch to OME's heavy duty front springs. |
|
| Author: | Gringo Loco [ Sun Sep 18, 2005 5:22 pm ] |
| Post subject: | |
Tuco any pics? Would like to see your set up. i am also considering the arbwith ome and have an 05 renegade. Laters |
|
| Author: | Tuco [ Sun Sep 18, 2005 5:43 pm ] |
| Post subject: | |
Gringo Loco - I have some on the way, as soon as I read the instructions on uploading photos to the forum. |
|
| Author: | auggy [ Sun Sep 18, 2005 5:50 pm ] |
| Post subject: | |
Try: http://www.imageshack.us ( upload the photos one by one there ) then link each image to the forums like this Code: [img]http://www.imageshack.us/image.jpg[/img]
hope that helps |
|
| Author: | Tuco [ Sun Sep 18, 2005 6:45 pm ] |
| Post subject: | |
Try my WWW link - I just uploaded some pics to cardomain.com How do I post a photo directly to this forum? |
|
| Author: | Tokyojoe [ Sun Sep 18, 2005 6:55 pm ] |
| Post subject: | |
TUCO, SHRINK YOUR AVATAR!!!!!!!! Please. |
|
| Author: | Tuco [ Sun Sep 18, 2005 7:02 pm ] |
| Post subject: | |
How about I delete it. WOW, that thing was HUGE!!! How do you shrink it? |
|
| Author: | Ed [ Sun Sep 18, 2005 8:05 pm ] |
| Post subject: | |
That's a real nice Jeep Tuco. I'm sure people would be interested to know how you managed to fit an "old" shape ARB bumper to your '05 KJ. Was there much needed in the way of modifications, or did it bolt straight on? Also, if you're running X-Line, you really should replace your roller fairlead with a solid one. Quote: How do you shrink it?
Go and get the Gimp; http://www.gimp.org/windows/ And check out the tutorial; http://www.gimp.org/tutorials/Lite_Quickies/ HTH |
|
| Author: | Tuco [ Sun Sep 18, 2005 9:05 pm ] |
| Post subject: | |
Thanks Ed, the older style ARB bolted right to the frame, no modification necessary. It appears the difference with the '05 fitment is the space between the fender flare and bumper on either side. The dealer that installed the ARB has a filler piece and the fog light trim on the way from Australia - down your way. ORO has an aluminum fairlead designed for the X-Line - it'll be here soon. |
|
| Author: | Gringo Loco [ Sun Sep 18, 2005 9:43 pm ] |
| Post subject: | |
Thanks Tuco, helps give me a better idea cuz I have a black 05 rennie just like Auggy. Hey Auggy I am also gonna put on some moabs and m/trs. Looking like the ome HD lift for me, recommended by Edwin. Laters |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|