| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rustys lift and .75 poly spacers http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19879 |
Page 1 of 1 |
| Author: | 05JeepKJ [ Sat Apr 21, 2007 1:45 am ] |
| Post subject: | Rustys lift and .75 poly spacers |
Who has used Rustys 2.5 coil spring lift and his .75 spacers together? Give me some positive or negative feedback. i am planning to put these on in a few days. |
|
| Author: | jeepkj02 [ Sat Apr 21, 2007 10:41 am ] |
| Post subject: | |
That would be too much lift for the KJ. That would be a total of 3.25" of lift. Instead of those spacers, you might want to try a clevis lift. This link might help you out: Click Here BTW, on those Rusty's poly spacers would you have to decompress the springs to install them, or do they go under the struts, like a clevis lift (with locknuts). |
|
| Author: | 05JeepKJ [ Sat Apr 21, 2007 11:41 am ] |
| Post subject: | |
To my knowledge it replaces the lower isolater in the strut assembly. I am trying to do that but i think i am going to do a clevis lift and assess the situation before i use the spacers. |
|
| Author: | Jeepjeepster [ Sat Apr 21, 2007 9:55 pm ] |
| Post subject: | |
That would be to much pre-load on the springs which would give way to much lift. The Franken lift uses a spacer similar to the rustys spacer but uses shorter springs. |
|
| Author: | Dje Ryu [ Sat Apr 21, 2007 10:24 pm ] |
| Post subject: | |
I would just stick to a clevis lift, also. I put one in today. Simple and easy. |
|
| Author: | Big D [ Sun Apr 22, 2007 9:31 am ] |
| Post subject: | |
Did mine a couple days ago, and had it out on a fairly rough trail (in some sections) and it performed wonderfully. |
|
| Author: | raceinfan [ Sun Apr 22, 2007 9:49 am ] |
| Post subject: | |
the Rusty's spacer is actualy close to 1 inch, I wouldn't attempt it thats asking for trouble |
|
| Author: | 05JeepKJ [ Sun Apr 22, 2007 10:34 am ] |
| Post subject: | |
I did a clevis lift yesterday, and it seems to be doing okay so i will stick with that. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|