| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| conduit lock nut dimensions? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19920 |
Page 1 of 1 |
| Author: | Dje Ryu [ Sat Apr 21, 2007 10:28 pm ] |
| Post subject: | conduit lock nut dimensions? |
I was just wondering how thick the conduit nuts are that you guys used for the clevis lift? I made my own spacers on the cnc lathe that I run at work and was just wondering how thick they are compared to the nuts? I used 2.65"ODx2.215"IDx0.200"thick. One each side. Leveled out the KJ perfectly, to my eye... pics coming as soon as I get my tires in and on, I promise! |
|
| Author: | renegadekj [ Sat Apr 21, 2007 10:31 pm ] |
| Post subject: | |
The conduit nuts are about 1/8",3/16" thick right about ! |
|
| Author: | USPLibby [ Mon Apr 23, 2007 7:09 pm ] |
| Post subject: | |
|
|
|
| Author: | Dje Ryu [ Mon Apr 23, 2007 8:45 pm ] |
| Post subject: | |
Thanks, USP. That helps. From the looks of it, they appear to be 1/8" so I have .05" less that that. Just about what I was aiming for. Like I said, it looks perfect, to me. And I got my Silentarmors (245/70-17) on it today. Won't be able to go off-road til the weekend but, so far there is absolutely no rubbing, without any trimming. I'm pretty sure that will change once it flexes a little, though. Not far from the pinch weld as is. Looks like it'll probably rub when stuffed but, maybe not. At least it doesn't look like I stole tires off a minivan, now. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|