LOST JEEPS :: View topic - Rusty's Coil lift with clevis lift

It may be just a tad higher in the rear WITH the clevis lift. Ive got the shorter OME HD springs on the rear with the Rustys lift on the front and two conduit nuts for the clevis lift and its perfectly level.

Be sure you dont have any upper balljoint contact with the three conduit nuts. Many people use 3 and its fine, but I believe it depends on how the coils are turned.

In less than a month i'm installing a Rusty's coil lift and doing a clevis lift. Im putting 3 conduit nuts under each strut and for the rear do i need 1 or 2 extra spring isolators? I want the KJ to be LEVEL not raked like it is in stock form. I just want to install it and be done. thanks!

oh and Al's a-arms going on also, so spring contact wont be an issue.

What are conduit nuts?

do you have any extra spring isolators installed in the rear? I'm getting Al's a-arms for the front so spring contact wont be an issue.

Author:	myjeepwalks [ Sun Apr 22, 2007 10:59 pm ]
Post subject:	Rusty's Coil lift with clevis lift
In less than a month i'm installing a Rusty's coil lift and doing a clevis lift. Im putting 3 conduit nuts under each strut and for the rear do i need 1 or 2 extra spring isolators? I want the KJ to be LEVEL not raked like it is in stock form. I just want to install it and be done. thanks! oh and Al's a-arms going on also, so spring contact wont be an issue.

Author:	Jeepjeepster [ Sun Apr 22, 2007 11:06 pm ]
Post subject:
It may be just a tad higher in the rear WITH the clevis lift. Ive got the shorter OME HD springs on the rear with the Rustys lift on the front and two conduit nuts for the clevis lift and its perfectly level. Be sure you dont have any upper balljoint contact with the three conduit nuts. Many people use 3 and its fine, but I believe it depends on how the coils are turned.

Author:	myjeepwalks [ Mon Apr 23, 2007 12:19 am ]
Post subject:
Jeepjeepster wrote: It may be just a tad higher in the rear WITH the clevis lift. Ive got the shorter OME HD springs on the rear with the Rustys lift on the front and two conduit nuts for the clevis lift and its perfectly level. Be sure you dont have any upper balljoint contact with the three conduit nuts. Many people use 3 and its fine, but I believe it depends on how the coils are turned. do you have any extra spring isolators installed in the rear? I'm getting Al's a-arms for the front so spring contact wont be an issue.

Author:	spencevans [ Mon Apr 23, 2007 1:20 am ]
Post subject:	Re: Rusty's Coil lift with clevis lift
myjeepwalks wrote: In less than a month i'm installing a Rusty's coil lift and doing a clevis lift. Im putting 3 conduit nuts under each strut and for the rear do i need 1 or 2 extra spring isolators? I want the KJ to be LEVEL not raked like it is in stock form. I just want to install it and be done. thanks! oh and Al's a-arms going on also, so spring contact wont be an issue. What are conduit nuts?

Author:	Maximum Carnage [ Mon Apr 23, 2007 9:21 am ]
Post subject:	Re: Rusty's Coil lift with clevis lift
spencevans wrote: What are conduit nuts? You find them in the electrical section of your hardware store.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Rusty's Coil lift with clevis lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19971	Page 1 of 1

Author:	Jeepjeepster [ Mon Apr 23, 2007 10:13 am ]
Post subject:
myjeepwalks wrote: do you have any extra spring isolators installed in the rear? I'm getting Al's a-arms for the front so spring contact wont be an issue. Nope, I do not have any on the rear...Just the springs.

Author:	meh_kick [ Mon Apr 23, 2007 11:38 am ]
Post subject:
This link (http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=17158&postdays=0&postorder=asc&start=15)contains some pics of my 04 with three conduit nuts and two additional sets of spring isolators. Since you want a level ride, you definitely don't want more than one extra set, and may not want any at all. Mine levels out pretty good now when I tow, when the hitch basket is full, or when I've got a full cargo area. Plus I don't mind a little pitch forward.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/