| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD diff collar http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19997 |
Page 1 of 1 |
| Author: | AndySRT [ Mon Apr 23, 2007 11:13 am ] |
| Post subject: | CRD diff collar |
Well i was just reading up that people were having problems with getting the diff collar to work for thier CRD's. I was wondering if anyone has come up with a solution or another option for the CRD and reinforcing the front diff. Andy |
|
| Author: | DarbyWalters [ Mon Apr 23, 2007 11:18 am ] |
| Post subject: | |
The easy solution would be to get a "steel" collar instead. It is thinner than the aluminum collar so there might be enuff room that it wouldn't hit. I had the Aluminum Collar and it definitely did not work on my CRD. |
|
| Author: | AndySRT [ Mon Apr 23, 2007 11:31 am ] |
| Post subject: | |
where can i order a steel collar from? |
|
| Author: | Mutt [ Mon Apr 23, 2007 11:33 am ] |
| Post subject: | |
I've got one, $50 includes shipping and it's yours. You'll have to get it cut to the right ID. |
|
| Author: | AndySRT [ Mon Apr 23, 2007 12:41 pm ] |
| Post subject: | |
theres a posibilty there mutt provided i can find someone to machine it down and figure out how much it needs to be machined down. |
|
| Author: | Mutt [ Mon Apr 23, 2007 12:47 pm ] |
| Post subject: | |
It needs to be taken to 3.5625". Any local machinist could spin it out for you, probably cost about $20. |
|
| Author: | Maximum Carnage [ Mon Apr 23, 2007 1:17 pm ] |
| Post subject: | |
Mutt wrote: I've got one, $50 includes shipping and it's yours. You'll have to get it cut to the right ID.
Does the one you have ftit an 02 gasser? If AndySRT doesn't take it, I will. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|