Does anyone have any pictures of the rear frame mount point for BoulderBars on a 2005? I just want to make sure mine is in the right spot before start drilling holes. Do you really have to drill the mount for the trailing arms? It doesnt look right. I would call AllJ but they are gone for another week again. Thanks.

_________________
2005 KJ Limited 4x4 3.7 Auto
ARB Bumper, Warn XD9000, PIAA lights
FrankenLift (OME Springs, Struts & Shocks)
Al's upper A-arms, Mopar Skids, Boulder Bars
245/75R16 BFG KO's/04 Columbia Ed. Rims
245/70R17 Blizzak DM-Z3's/17x7.5 Limited rims
Cobra CB with Firestick Antenna

If you have the 7 (maybe?) 1/4-20 bolts in the pinch weld then the frame holes are drilled where they come to rest. I used a jack to get the mounting area flush with the bottom of the frame when I installed the bb's onto my 03.

_________________
2008 Xterra 4x4

1986 CJ7
Lots of custom stuff...

Gone, But not Forgotten...
2003 Sport - 'Fire Engine' Red
Detours KJ Backbone
Skids
Boulder Bars
JBA 4.5 A Arms
245/75/16 Wrangler Duratracs's on Cragar Soft 8’s
Spidertrax 1.25" Spacers
Superwinch LP 8500
Frankenlifted

yeah, I used the template to drill the holes for the pinch weld, and hooked the bars on there with the bolts and nuts, but just didnt like the looks of where the brace closest to the back tire that goes to the frame, hits the frame. It is going to require that I drill through the mounting bracket for the trailing arms (think those are trailing arms, may have wrong terminology). Just seems wierd to drill thru that and be using self tapping bolts. But I may just be worrying to much.

_________________
2005 KJ Limited 4x4 3.7 Auto
ARB Bumper, Warn XD9000, PIAA lights
FrankenLift (OME Springs, Struts & Shocks)
Al's upper A-arms, Mopar Skids, Boulder Bars
245/75R16 BFG KO's/04 Columbia Ed. Rims
245/70R17 Blizzak DM-Z3's/17x7.5 Limited rims
Cobra CB with Firestick Antenna