| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Materials list for coil lift...? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=20344 |
Page 1 of 1 |
| Author: | jdumont [ Wed May 02, 2007 6:04 pm ] |
| Post subject: | Materials list for coil lift...? |
Anyone have a materials list, mainly tools, for doing a coil lift? Looking for wrench/socket sizes .... thanks in advance |
|
| Author: | Gringo Loco [ Wed May 02, 2007 6:16 pm ] |
| Post subject: | |
Here's what I got when I asked http://www.lostjeeps.com/forum/phpBB3/vie ... ight=tools |
|
| Author: | spencevans [ Wed May 02, 2007 11:59 pm ] |
| Post subject: | |
I just competed a coil lift. Here are the tools I used. 1. 3 ton hydrolic Jack (must have) 2. 2 Jack stands 3. 1/2 socket set with breaker bar. Standard upto 13/16 and Metric upto 18 4. Sockets sizes 10, 12, 15, 18, 11/16, 3/4, 13/16. 5. Ratchet Strap 6. Hammer 7. Flat head screw driver 8. Phillips head screw driver 9. Adjustable wrench 10. An extra pair of hands I hope this helps. I did the lift on a CRD but it should be pretty close. I took me about three hours a side for the front and rear took about 1 hour total. There is a really good "How To" on the http://www.jeepkj.com. Good Luck. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|