| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ? about Al's A-Arms http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=20890 |
Page 1 of 1 |
| Author: | scottslibby [ Sun May 20, 2007 6:36 pm ] |
| Post subject: | ? about Al's A-Arms |
got them installed and did away w/the contact but know when I turn to the left the right side makes a clank sound and when I turn to the right the left side clanks almost as if the arms are not tight but I shocke them and they were not moving.Any ideas???? |
|
| Author: | Jeepjeepster [ Sun May 20, 2007 7:37 pm ] |
| Post subject: | |
You may not physically be able to move them but they could still be moving. May want to check all the bolts and make sure they are within proper specs.. |
|
| Author: | scottslibby [ Sun May 20, 2007 8:07 pm ] |
| Post subject: | |
they did not come with torqe specs,Maybe I will e-mail Al |
|
| Author: | myjeepwalks [ Sun May 20, 2007 8:13 pm ] |
| Post subject: | |
scottslibby wrote: they did not come with torqe specs,Maybe I will e-mail Al
I just installed mine the other day. I didn't torque them except for the ball joint nut to i think it was 60ft. lbs.. I just snugged them tight and have no noise. Mine also came with directions but i dont have them with me. |
|
| Author: | tjkj2002 [ Sun May 20, 2007 8:46 pm ] |
| Post subject: | |
scottslibby wrote: they did not come with torqe specs,Maybe I will e-mail Al 90 ft-lbs for those UCA mount bolts/nuts.
|
|
| Author: | scottslibby [ Sun May 20, 2007 10:40 pm ] |
| Post subject: | |
thanks tjkj |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|