Any opinions on this lift? I can't install myself and it's all that's available by the shops in town. Any drawbacks? Maybe wheel 2-3 times a year, fairly light stuff.

They shops claim 32" tires will fit no problems and no trimming...

http://www.roughcountry.com/jeep_liberty_3.html

Don't believe the shops. Do a search for Rough Country and my user name to see what problems I had with it.

_________________
'03 Sport
Grand Cherokee TCM, Skids, Superwinch EPi 9.0 in cradle mount with 125' 5/16 Viking Trail Line, Mopar Rock Rails, Trac-Loc Diff, Frankenlift in front and Skyjacker/JBA springs out back, Monroe Reflex Shocks in rear, JBA Gen 4.5 Upper Control Arms, Moog LBJ's, 245/75/16 Goodyear Wrangler Duratracs.

Every lift I know of needs trimming to run 32s. I bet the shops haven't even done a Liberty yet and are just looking for the business and a test subject.

_________________
No one knows as much as all of us.

Wow, there are enough problems with that lift to make me look elsewhee. Maybe if I just order my own Rusty's lift I can ge a shop to install it.

You'll have to take it apart first, but if you can get a shop to remove the top plates from your old struts and assemble the new struts from Rusty's, it is no harder to install than the RC. In fact given that before the connecting the clevis to the LCA, the RC assembled strut is longer by 1.5 inches it may be easier.

_________________
'03 Sport
Grand Cherokee TCM, Skids, Superwinch EPi 9.0 in cradle mount with 125' 5/16 Viking Trail Line, Mopar Rock Rails, Trac-Loc Diff, Frankenlift in front and Skyjacker/JBA springs out back, Monroe Reflex Shocks in rear, JBA Gen 4.5 Upper Control Arms, Moog LBJ's, 245/75/16 Goodyear Wrangler Duratracs.