| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Torque values for suspenison lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=23172 |
Page 1 of 1 |
| Author: | jros3484 [ Mon Aug 06, 2007 10:13 pm ] |
| Post subject: | Torque values for suspenison lift |
I posted this in the tech seciton as well, dont yell at me! I need to know that the torque values are for a suspension lift. Im getting a Rusty's 2.5 coiler in tomorrow and might install it this week or on the weekend. Im thinking of throwing the clevis lift/rear isolator on now before settling... bad or good idea. Thanks guys... 
Joe |
|
| Author: | tjkj2002 [ Mon Aug 06, 2007 10:28 pm ] |
| Post subject: | Re: Torque values for suspenison lift |
jros3484 wrote: I posted this in the tech seciton as well, dont yell at me! I need to know that the torque values are for a suspension lift. Im getting a Rusty's 2.5 coiler in tomorrow and might install it this week or on the weekend. Im thinking of throwing the clevis lift/rear isolator on now before settling... bad or good idea. Thanks guys... Look in the tech section about 3/4 ways down the page,look for the topic "common torque settings for the front suspension".It's about the 39th-40th topic down from the top.
Joe |
|
| Author: | jros3484 [ Mon Aug 06, 2007 10:53 pm ] |
| Post subject: | |
HAHAHA... Reading isnt one of my strongpoints... thanks |
|
| Author: | adamkrz [ Tue Aug 07, 2007 3:47 pm ] |
| Post subject: | |
I would put the clevis washers in when installing the struts - I used 2 but could have used 3,The rears can be done anytime after if you need more lift,.. |
|
| Author: | jros3484 [ Tue Aug 07, 2007 6:29 pm ] |
| Post subject: | |
awesome guys, thanks for the info |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|