hey guys is there a difference between the springs rusty's has on his website and the ones that are included with his lift?the lift is listed at 2.5 inches of lift and the separate springs are 2.0.

I don't know but I imagine they are the same spring.

I love my rusty's lift and I think it is a good value but the info you get from them is often confusing and contradictary.

You can call and ask but you might just get more confusion. If you are looking at the OME coils he sells they are 1.5 inch lift so you need to add a 1.5 inch spacer to get the same as you get with the frankenlift.

Just get the kit and ask for the OME rear shocks (50 bucks more) or get the long travels from allJ's.

_________________
03' renegade with light bar, limited slip rear diff,
rusty's 2.5 lift, 3/8"clevis, 2 iso pads
RRO sliders,Skid Row tranny plate,oem skids
Curt rear hitch with D shackle,
245/75 R16 wrangler M/T R's Al's arms, Moog LBJ's
K&N drop in filter, Thule racks 60"
Husky mats,Wet Okole seat covers
Garmin Nav, Spidertrax spacers

the reason im asking is because im about to purchase rusty's front springs from a member of this site and they are listed at 2.5 inches of lift.

Then they are 2.5" minus the sag. As rustys age they sag a little, maybe a 1/4" or so. You can do a clevis lift or strut plate lift to offset it.

I have a 3 ring lift on my jeep. You will get UBJ contact on the springs with this much lift. Go with 2 rings and it will comp for the sag.

The three ring caused me to go to Al's A arm for lifted libby's. Worth it though cause als are servicable and oversized so I don't have to worry about losing a wheel.

_________________
03' renegade with light bar, limited slip rear diff,
rusty's 2.5 lift, 3/8"clevis, 2 iso pads
RRO sliders,Skid Row tranny plate,oem skids
Curt rear hitch with D shackle,
245/75 R16 wrangler M/T R's Al's arms, Moog LBJ's
K&N drop in filter, Thule racks 60"
Husky mats,Wet Okole seat covers
Garmin Nav, Spidertrax spacers