LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

For those with Hi-Lifts...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=23303		 Page 1 of 2
Author:  2006KJSPORT4x4 [ Fri Aug 10, 2007 1:48 pm ]
Post subject:  For those with Hi-Lifts...
There is a local Jeeper that is fabricating a Hi-Lift mount that is usable on TJs, JKs and KJs. It goes on the spare tire mount. Thought I'd go ahead and get an interest for him to see if he would have a market here for those of you that have Hi-Lifts and would not like them up on the roof or inside your KJ anymore....

Here are some pics...

Image

Image

Image

Image

Image

Image

Image

Right now the guy is working on getting a paypal setup for those that would truly be interested in one of these. PM me if you would like more details or a spot on a list to get one...THANKS!!!

-Scott
Author:  WoodysKJ [ Fri Aug 10, 2007 3:18 pm ]
Post subject: 
Looks like a great idea!!

HOW MUCH????

And how much weight does it add to the spare tire mount on the KJ's I don't have a high lift jack, yet... but what do they weigh?

I like the removable mount. GREAT idea!!

Can he make the studs for the high lift the same thread as the spare tire studs? that way you only need your tire wrench to remove it? I know alot of people (myself included) have spare lug nuts from locking lugs being installed.

You will get lots of ideas thrown in opn here, be prepared.
Author:  JJsTJ [ Fri Aug 10, 2007 4:26 pm ]
Post subject: 
How much?
Author:  riptricket [ Sat Aug 11, 2007 1:50 pm ]
Post subject: 
too bad i have a RL license plate bracket installed there...Image
Author:  Tokyojoe [ Sun Aug 12, 2007 4:18 pm ]
Post subject: 
So where's the RL rear bumper?


Those of us with RL's spare tire license plate mount would have to come up with a new place.

I was thinking mount it through a hole in the Hi Lift but then it would be a hassle to remove when you needed to use the lift.
Author:  riptricket [ Mon Aug 13, 2007 1:10 am ]
Post subject: 
it is receiving some finals coats of paint!!!
i'd love to have this hi-lift mount... maybe ho could team up with Marty and they could come up with something?
Author:  2006KJSPORT4x4 [ Thu Aug 23, 2007 11:51 am ]
Post subject: 
Check here for further details....THANKS!!!!
Author:  Saber [ Sat Aug 25, 2007 6:33 pm ]
Post subject: 
I don't know why you would need a hiflit on a stock KJ. Just to use as a come along? You would rip the bumpers off if you tried to jack it up like that. I have one for my Montero, but only use it when I have to. They can get a bit wobbly most of the time a bottle jack works the best IMO
Author:  2006KJSPORT4x4 [ Mon Aug 27, 2007 4:09 pm ]
Post subject: 
It was on a stock libby just to show that it functions properly with the tailgate and glass open, so then those that do have a modded Libby that would like one can see that it functions alright in either direction...FYI
Author:  spoonplugger1 [ Tue Aug 28, 2007 10:38 am ]
Post subject: 
Will the tire mount take the extra weight longterm? I thought we had people having problems on earlier modded rigs with just the extra tire weight.
Author:  Cacher123 [ Wed Nov 07, 2007 8:46 pm ]
Post subject: 
Looks like it could be used to mount a Jerry can if u didn't want to use the Hi-Lift. Also an stepped extension off the trailer hitch receiver could be used to support some of the weight.
Author:  _UnLiMiTeD_ [ Wed Nov 07, 2007 8:59 pm ]
Post subject: 
.......
Author:  ed. [ Thu Nov 08, 2007 2:18 am ]
Post subject: 
riptricket wrote:
too bad i have a RL license plate bracket installed there...Image


Any close up's of it?
RL = Rock Lizard? I can't seem to find it on their website :(
Author:  elephantrider [ Thu Nov 08, 2007 9:23 am ]
Post subject: 
i inquired about it a while back. believe it was $70 / shipped.

looks like a great product.
Author:  jsc7002 [ Thu Nov 08, 2007 10:14 am ]
Post subject: 
ed. wrote:
riptricket wrote:
too bad i have a RL license plate bracket installed there...Image


Any close up's of it?
RL = Rock Lizard? I can't seem to find it on their website :(


here you go

http://www.rocklizardfabrications.com/jeep_liberty.htm
Author:  2006KJSPORT4x4 [ Thu Nov 08, 2007 12:56 pm ]
Post subject: 
Well here is the best pic I could fine on my work computer of my rig with the Hi-Lift mount. Works very well, no shaking or vibration noises heard yet, very beefy construction. I'm looking at possibly rigging up some sort of jerry can holder onto the mount as well, but we'll see what happens. The spare tire mount and tailgate all appear fine so far as well.

Image

The lift is now in the vertical position since my Dad walked into the lift when it was in the horizontal position and cursed the darn thing.
Author:  ed. [ Thu Nov 08, 2007 6:45 pm ]
Post subject: 
jsc7002 wrote:
ed. wrote:
riptricket wrote:
too bad i have a RL license plate bracket installed there...Image


Any close up's of it?
RL = Rock Lizard? I can't seem to find it on their website :(


here you go

http://www.rocklizardfabrications.com/jeep_liberty.htm


darn they don't list is as a seperate product on that page.
Author:  riptricket [ Thu Nov 08, 2007 6:56 pm ]
Post subject: 
yes...Jeep Liberty Komodo Dragon Rear Bumper (Part #KDR-KJ)

All rear bumpers come with license plate relocation bracket and light that will work with stock tire carrier on tailgate or our Komodo Dragon Tire Carrier. All rear bumpers come sandblasted when purchased at the Regular Retail Price.

Regular Retail Price

$775.00 (plus shipping)
Author:  LibertyFever [ Sun Nov 11, 2007 9:34 pm ]
Post subject: 
I like the idea! :D You can easily remove it for security purposes.

I've been wondering where I could put my HiLift on my YJ but never even considered putting one on my KJ.
Can you actually use a HiLift on your KJ?
Author:  2006KJSPORT4x4 [ Mon Nov 12, 2007 1:24 am ]
Post subject: 
if you have rock rails you canuse the hi-lift on those but make sure to do it with the door open due to the angle teh hi-lift will make when in that position, you don't want your door getting dented....you can also of course use their tire adaptor on the KJ too, or if you have an ARB or other aftermarket bumper you can perhaps use it on those or even in a hitch reeiver if you have one of those
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/