LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
31/10.5/16 with 2.5" Rusty Lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=2380	Page 1 of 1

---

Author:	USA KJ [ Sun Oct 02, 2005 11:34 am ]
Post subject:	31/10.5/16 with 2.5" Rusty Lift
I have a 2002 Liberty Limited 4x4 and looking to add the above package. Lift comes in next week. Does anyone have pics so I can see what this looks like? Will I have rub on a 2002 Thanks

---

Author:	Calvin56 [ Sun Oct 02, 2005 12:21 pm ]
Post subject:
245 x 75 r16's will fit without rubbing on most lifted KJ's; I'm pretty sure they are 30.5 x 9.5. The tire chart is down at the moment, just did a google for the metric tire conversion. I have some 31 x 9.5" aggressive M/T's on, and had to trim to get them to stop rubbing: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=2019

---

Author:	KaJunKJ [ Mon Oct 03, 2005 4:08 am ]
Post subject:	RE:
I'm running 31x10.50x15's and i have some rubbing even after a few trim sessions.

---

Author:	KaJunKJ [ Mon Oct 03, 2005 4:10 am ]
Post subject:	RE:
AND I have the Rusty's 2.5" spacer lift on mine ('02 sport)

---

Author:	vxla [ Mon Oct 03, 2005 1:53 pm ]
Post subject:
Just note: my 245x75x16 do NOT fit with rusty's lift + .6" clevis lift. There is a lot of rubbing. But I have very aggressive tires. Be prepared to cut fenders if you go that route. Here's pics... http://users.catastrophe.net/eric/arch/ ... Jeepstock/

---

Author:	jcsn04kj [ Tue Oct 04, 2005 5:40 pm ]
Post subject:
I have the rusty's lift and 265/70 R16's pretty close to the 31x10.50 size and I rub behind the fog lights at full lock. I also hammered over the pinch weld. You can see some pics below.

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/