Not a factor at all UNLESS; you have already squeezed as big of tire in
there as you can AND you put a heavy MF winch in there......
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ARB bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=23821 |
Page 1 of 1 |
| Author: | hardhittinz [ Mon Aug 27, 2007 6:19 pm ] |
| Post subject: | ARB bumper |
could i get 1 with the stock suspension? or do you have to upgrade that first do to the weight? |
|
| Author: | humptyjumped [ Mon Aug 27, 2007 6:28 pm ] |
| Post subject: | |
ran mine on the stock for months.. no prob.... only weighs about 75lbs... |
|
| Author: | WoodysKJ [ Mon Aug 27, 2007 6:29 pm ] |
| Post subject: | |
Posts on here sugest that the weight is a factor, but a simple clevis lift will counteract the bull bar weight. Or so i understand. Obviously there will be more weight up front. do a search and see how people delt with it. I am planning the same thing. actually hoping it causes me to lift it so I can say OOPS sorry dear i guess i neec to do this now... |
|
| Author: | hardhittinz [ Mon Aug 27, 2007 6:36 pm ] |
| Post subject: | |
ok cool sounds good..Now to talk the old lady into letting me get one. |
|
| Author: | humptyjumped [ Mon Aug 27, 2007 6:36 pm ] |
| Post subject: | |
Not a factor at all UNLESS; you have already squeezed as big of tire in there as you can AND you put a heavy MF winch in there......
|
|
| Author: | ATXKJ [ Mon Aug 27, 2007 8:54 pm ] |
| Post subject: | |
on CRD springs (with Daystar) it dropped abou 3/4" when I put on the ARB. not terrible - but noticeable. |
|
| Author: | tommudd [ Mon Aug 27, 2007 9:44 pm ] |
| Post subject: | |
With my OME Heavy Duty Springs I have not noticed a drop at all with the ARB but since you need to know about stock then yes you will notice some droop. WHY you ask  well stock springs are rated at or below 300 lb, Rustys are only 310 lb, but the springs that ARB (OME) have (recommends) for the ARB is rated at 400 lbs. Can you run it on there, sure, but just know that sooner or later you will need to update your front suspension due to sagging and extra wear on the struts/springs.
|
|
| Author: | Green Renegade [ Mon Aug 27, 2007 10:18 pm ] |
| Post subject: | |
we did the bumper before the lift on our kj. It was fine, but get it aligned afterwards, we messed up our front tires driving to California and back without doing so. |
|
| Author: | elephantrider [ Tue Aug 28, 2007 11:39 am ] |
| Post subject: | |
i weighed the arb when i got mine in the mail, it was 98lbs on a digital scale. the bumper will eventually sag on stock springs, and will sag on rustys front springs as well. ome hd's are the way to go if you plan on installing one of these kangaroo catchers. |
|
| Author: | tommudd [ Tue Aug 28, 2007 12:09 pm ] |
| Post subject: | |
Thanks Jason for backing me up there  
tom |
|
| Author: | humptyjumped [ Tue Aug 28, 2007 12:36 pm ] |
| Post subject: | |
True enough. But he doesn't need to upgrade FIRST. He can upgrade LATER. That was the original question, then this thread took off in a different direction..... 
|
|
| Author: | tommudd [ Tue Aug 28, 2007 12:41 pm ] |
| Post subject: | |
whatever ..............when someone asks a question I think they deserve a good overall view of what he wants to do, will it work SURE GO FOR IT, will it give you problems down the road YES!!!!!!!!!! I will NEVER answer some one with just a yes I want them to know yes they can do it but here is what you are in for in the future! That way they will not come back and say well everyone on LOST said it would work and now my front is sitting lower and the struts are shot! TOM SAID THAT!!!!!!
|
|
| Author: | humptyjumped [ Tue Aug 28, 2007 12:49 pm ] |
| Post subject: | |
Hey tom... what do you really think? 
|
|
| Author: | tommudd [ Tue Aug 28, 2007 12:56 pm ] |
| Post subject: | |
Ya know what I think and I am never afraid to say it! My boss does tell me to tone it down at times but WHY??? Life to me would be so boring that way! At my age I fiqure I can say anything and people will say "Oh hes just old dont mind him"
Have a great afternoon humptyjumped, I will keep the rest of my thoughts rolling around in my head now............. 
Tom |
|
| Author: | elephantrider [ Tue Aug 28, 2007 1:40 pm ] |
| Post subject: | |
not sure how long the stock suspension would last with a 100lb weight hanging off the nose. you can upgrade the bumper. the suspension would have to be the very next thing in line. i only ran the arb with rustys springs for a few months before i had to get hd springs to hold that thing up. started to get rubbing in places i havent rubbed before
|
|
| Author: | tommudd [ Tue Aug 28, 2007 4:32 pm ] |
| Post subject: | |
just going to keep my mouth shut
|
|
| Author: | ed. [ Thu Aug 30, 2007 10:03 pm ] |
| Post subject: | |
On another ARB bar related issue. Can you run 32" muddies with 2.5" and pinch weld pound mod with the ARB bar? |
|
| Author: | tjkj2002 [ Thu Aug 30, 2007 10:06 pm ] |
| Post subject: | |
ed. wrote: On another ARB bar related issue. Yes,I'm doing it right now,with 16x7 rims with 4.5" BS.
Can you run 32" muddies with 2.5" and pinch weld pound mod with the ARB bar? |
|
| Author: | ed. [ Thu Aug 30, 2007 10:12 pm ] |
| Post subject: | |
tjkj2002 wrote: ed. wrote: On another ARB bar related issue. Yes,I'm doing it right now,with 16x7 rims with 4.5" BS.Can you run 32" muddies with 2.5" and pinch weld pound mod with the ARB bar? Awesome! Cheers for that. Was worried it wouldn't clear the back of the ARB bar.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|