| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wheels http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=24100 |
Page 1 of 1 |
| Author: | Ertsride1 [ Thu Sep 06, 2007 10:05 am ] |
| Post subject: | Wheels |
I do this bc there aren't enough wheel posts on here. I have one simple question, I have a 04 2.5 lift and 245/75/16 destination mt's. I know that there are soooooo many wheels on the market. I just want to know the spec's from your aftermarket wheels. I would like to know width and offset and maybe a pic or two. I am thinking about the soft eights but what else would be a good wheel for about the same price? Please help me out. Thanks Garrett |
|
| Author: | 2006KJSPORT4x4 [ Thu Sep 06, 2007 10:13 am ] |
| Post subject: | |
well I run AE Series 137 wheels that are 16x8"with 4.5" backspacing. I don't have wheel spacers and the rubbing was fairly severe on the back end of the bumper and the pinch weld so a lot of trimming was made to compensate for that and now all is cured. Now for the pics: 
|
|
| Author: | Ertsride1 [ Thu Sep 06, 2007 10:38 am ] |
| Post subject: | |
that looks great........thanks |
|
| Author: | Fulltimer [ Thu Sep 06, 2007 10:42 am ] |
| Post subject: | |
I take it that you mean the back end of the front bumper? Terry |
|
| Author: | 2006KJSPORT4x4 [ Thu Sep 06, 2007 12:34 pm ] |
| Post subject: | |
yes the front bumper, sorry bout that....but in regards to the back end, I have had no rubbing or at least haven't heard of any rubbing in the rear yet... |
|
| Author: | MattB [ Thu Sep 06, 2007 1:34 pm ] |
| Post subject: | |
Are those true beadlocks in that pic 2006? Very nice looking wheels. |
|
| Author: | 2006KJSPORT4x4 [ Thu Sep 06, 2007 3:29 pm ] |
| Post subject: | |
no they are not....but i'll tell you what they are...HELL to clean is what they are, and when going through mud they just collect stuff, so that is the only CON to them, I love the look and the looks that come with the modded libby |
|
| Author: | Dje Ryu [ Thu Sep 06, 2007 9:10 pm ] |
| Post subject: | |
Are there any beadlocks that will fit around our rotors, with the right backspacing and everything? |
|
| Author: | tommudd [ Thu Sep 06, 2007 9:22 pm ] |
| Post subject: | |
you can get beadlocks in almost any size IF you have the $$$$$$ 
|
|
| Author: | Maximum Carnage [ Thu Sep 06, 2007 10:56 pm ] |
| Post subject: | |
More wheel pics!! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|