| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| question on transfercase skid install http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=24167 |
Page 1 of 1 |
| Author: | hardhittinz [ Sat Sep 08, 2007 7:35 am ] |
| Post subject: | question on transfercase skid install |
please help got the skid but i cant figure out how the nutzerts work i stuck one in the hole and it falls right back out what keeps the sleeve in the hole on the jeep? |
|
| Author: | WoodysKJ [ Sat Sep 08, 2007 8:12 am ] |
| Post subject: | |
The nutzerts need to be tightened down on them selves. They compress once tightened down and thus become permanent. They came with a little sleave, or should have, insert the nutzert with the bolt started and the sleave betweem the bolt and the nutzert. start tighening the bolt. this will compress the nutzert making it expand inside the crossmember and thus becoming secure. READ the instructions on torque. DO NOT OVER TIGHTEN!!! Get a torque wrench and learn how to use it. good luck Also check then now and then once installed making sure they are tight. |
|
| Author: | hardhittinz [ Sat Sep 08, 2007 8:22 am ] |
| Post subject: | |
ok i think i understand now thanks for the info |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|