LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Straight axle conversion??
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=24190		 Page 1 of 1
Author:  swmpthg [ Sun Sep 09, 2007 1:49 pm ]
Post subject:  Straight axle conversion??
Im considering on converting my front end to a dana 44 i think i can use a cherokee or wrangler front end.. has anyone done this I have a 5.5 inch lift on my kj now but i am going to go bigger later and im going to convert the front end. I have seen a KJ in a magazine that did it but it didnt say anything about it in there.. has anyone atempted this?

thanks
Author:  BeepBeepJeepJeep [ Sun Sep 09, 2007 2:07 pm ]
Post subject:  Re: Straight axle conversion??
swmpthg wrote:
Im considering on converting my front end to a dana 44 i think i can use a cherokee or wrangler front end.. has anyone done this I have a 5.5 inch lift on my kj now but i am going to go bigger later and im going to convert the front end. I have seen a KJ in a magazine that did it but it didnt say anything about it in there.. has anyone atempted this?

thanks


I'm not quite sure how you managed to get a 5.5" lift on your KJ. I'm assuming this is the truck you saw in the magazine...

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=24132
Author:  RQuarte [ Sun Sep 09, 2007 2:45 pm ]
Post subject: 
There is a whole forum for the SFA conversion. http://www.lostjeeps.com/forum/phpBB3/viewforum.php?f=73
Author:  LiLredLibby [ Sun Sep 09, 2007 3:00 pm ]
Post subject:  Re: Straight axle conversion??
BeepBeepJeepJeep wrote:
swmpthg wrote:
Im considering on converting my front end to a dana 44 i think i can use a cherokee or wrangler front end.. has anyone done this I have a 5.5 inch lift on my kj now but i am going to go bigger later and im going to convert the front end. I have seen a KJ in a magazine that did it but it didnt say anything about it in there.. has anyone atempted this?

thanks


I'm not quite sure how you managed to get a 5.5" lift on your KJ. I'm assuming this is the truck you saw in the magazine...

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=24132


mehkick has a thread on this KJ he seen in a nearby hometown on swmpthg,s liberty and IIRC he used both springs and spacers to axchieve his lift.I too am only a few miles away from swmpthg,but have'nt had the chance to check it out yet.I think it's in the "Midwest" section.However I did manage to find a pic of it.Hope you don't mind me showin' this thing off,as it is sweeeeeet.Let me know "swmpthg" and I'll delete it at your request. :wink:

Image

Ron
Author:  KJ04 [ Sun Sep 09, 2007 4:52 pm ]
Post subject:  Re: Straight axle conversion??
swmpthg wrote:
Im considering on converting my front end to a dana 44 i think i can use a cherokee or wrangler front end.. has anyone done this I have a 5.5 inch lift on my kj now but i am going to go bigger later and im going to convert the front end. I have seen a KJ in a magazine that did it but it didnt say anything about it in there.. has anyone atempted this?

thanks


It's about time you showed up. :lol:
Here's the link...http://www.lostjeeps.com/forum/phpBB3/viewforum.php?f=73
Author:  meh_kick [ Sun Sep 09, 2007 8:02 pm ]
Post subject: 
http://www.cardomain.com/ride/2644557 Still waiting to meet up though Swamp Thing! Glad to see you made it to the board.
Author:  elephantrider [ Sun Sep 09, 2007 9:05 pm ]
Post subject: 
im glad swamp made it on board as well.

interested to see how is driveline is holding up with the double lift job.

cv's ?
driveshaft ?
u joints ?
Author:  JJsTJ [ Sun Sep 09, 2007 10:04 pm ]
Post subject: 
Any pics of that beast wheeling?
Author:  LiLredLibby [ Sun Sep 09, 2007 10:29 pm ]
Post subject: 
JJsKJ wrote:
Any pics of that beast wheeling?


Go up to meh_kicks reply and click on his "Cardomain" page for a few mild offroad pics down at the river.Our rocks here in ohio don't compare to your landscaping,but it looks like it has potential.

Ron
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/