LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Installing Mopar Light Bar
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=24245		 Page 1 of 1
Author:  Sean150 [ Mon Sep 10, 2007 10:40 pm ]
Post subject:  Installing Mopar Light Bar
Ok, so I'm looking into making a light bar which attaches to the same spot the mopar light bar goes. So I take off the weather stripping and discover that there are no threaded bolt holes underneath like I thought there would be. So my question is, How does the Mopar light bar attach?
Author:  callaway [ Mon Sep 10, 2007 11:06 pm ]
Post subject: 
you drill holes into the roof, insert nutzerts, and then attach the light bar to said nutzerts

be careful to only drill through the sheet metal and not into the cabin :P



nutzert holes...
Image
Author:  tommudd [ Mon Sep 10, 2007 11:57 pm ]
Post subject: 
Cool, I can help you drill holes in the top of yours Sean!! :wink: cant wait!
Author:  Sean150 [ Tue Sep 11, 2007 12:05 am ]
Post subject: 
yeah.... you can do that as soon as I put a sunroof in yours. :twisted:
Author:  KY Liberty [ Thu Sep 13, 2007 6:27 pm ]
Post subject: 
I'm really thinking about buying the light bar. How do the power wires get run? Also, what does the switch for it look like?

Thanks
Author:  0311_DoC [ Thu Sep 13, 2007 8:15 pm ]
Post subject: 
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=19754

this should help a bit
Author:  Rush345 [ Fri Sep 14, 2007 12:46 am ]
Post subject:  This may help
I found this thread on abother forum but I think it covers all the different ways of doing with also helpful hints some have never heard of .

GO TO : http://www.jeepkj.com/forum/showthread.php?t=26556

It should at least give you some ideas on this matter. Good Luck :idea: 8)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/