mostly noisy from what I have read , so if you can out up with that

Mine makes a ton of noise. I turn the radio up. I think the issue is due to the fact that when engaged they push and pull against the posts. Since they are only held on with a pin and not bolted down, they are going to bang around against the pin, post and frame when engaged.

Since the lift, I have had to adjust mine to keep them from hitting the top of the disconnect and pin against the side of the a arm. They were hitting so hard it bent the pin and I had to cut it off and use a punch to get the pin out of the post. Shortened the discos and it works much better, but it still makes minor contact on big bumps. I learned the hard way to make double sure they are torqued and that you use the right amount of thread locker. Insufficient thread locker or torque and the posts will liberate themselves from the vehicle in short order. Some have replace the pins with better cotter pins as well.

You are so right Ron, off road ya got to have some noise but on road we want a Caddy ride and sound
and of course we become more macho off road even some of the women do....some anyways