dose anyone have a good pic of where to cut the inerfender of an 05 Kj???

I have a 2" daystar lift and 1.25 wheel spacers with 245's I just want to make quick work of the triming.

thank s

Sara and Nate

_________________
2005 Kj Sport 2wd
2.5" Daystar lift and 245x75 Goodyear RS-A's
98 Tj on 37's (my BF's)
MY lights are BLUE!!!!

http://www.texasoffroad.net/galleries/lonestar/texastj
http://www.cardomain.com/ride/2080764

Hey Sara are you and Nate going to Katemcy Rocks this weekend? If so Jasonk and I will be there. Sorry I can't help with the inner fender cutting, I never had to do any to my 05.

_________________
Chris

2005 Renegade
Frankenlift
245/75/16 Goodyear MT/Rs

i removed my entire fender wells ...

its not hard, just comes right out if you take the rivets out of the outer fender lip.

i tried to be careful and cut just what i needed to, but found out the hard way that its easier to remove the whole thing.

_________________
2004.5 dodge qclb
smarty powered / isspros
2005 sivler lj
http://s303.photobucket.com/albums/nn13 ... ider_2008/

I miss Katemecy !!!
You have a great wheeling park down there in the hill country.

_________________
2005 Liberty Renegade (stock) for now !!


Pics here: http://s123.photobucket.com/albums/o318/ctr97tj/
Wish list: 2.5 inch lift, bigger tires and more aggressive tires. Custom rock sliders. That's it for now.

Surprisingly, There's not much to it. Here's my pinch weld trimmed and pounded over:



and just about half an inch off the plastic splash guard that runs along the bottom of the bumper fascia.

_________________
Ron


"There are few problems in life the liberal application of duct tape can't solve."