It is currently Mon Nov 09, 2026 5:59 am

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
Cobalt-60
 Post subject: Rusty's Off-Road Rock Panel Skids/Rock Rails Question?
PostPosted: Mon Oct 01, 2007 11:49 am 
Offline
LOST Addict
User avatar

Joined: Thu Jul 19, 2007 3:52 pm
Posts: 1184
Location: Atlanta, GA
Anybody know what the proper size drill bits are to drill the starter holes for the "self-tapping" screws on the frame and pinch weld mounts for a set of these?

_________________
Colin
LOST#85291
"Blue Bunny"
04 KJ Sport 3.7L AT 4x4
Steel IFS/DL&DTT/4.10s/Tow Pkg/Mopar-Rusty's-Skid Row skids&sliders/OME struts&springs/Rancho shocks/Terraflex bumpstops/Landy FRH/Gen Steel/Grabber AT2s/Spidertrax/Rockcrusher/Hella/Smittybilt XRC8/Bulldog wiring/NAPA brakes/JBA UCAs&spacers/Deka Intimidator
Top
 Profile  
 
JJsTJ
 Post subject:
PostPosted: Mon Oct 01, 2007 12:59 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
Not sure on Rustys but the All J Boulderbars use an F size bit which can be tough to find. Sears and some True Value stores usually carry them.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
Cobalt-60
 Post subject:
PostPosted: Tue Oct 02, 2007 9:56 am 
Offline
LOST Addict
User avatar

Joined: Thu Jul 19, 2007 3:52 pm
Posts: 1184
Location: Atlanta, GA
Bump

Anybody else have any ideas?

_________________
Colin
LOST#85291
"Blue Bunny"
04 KJ Sport 3.7L AT 4x4
Steel IFS/DL&DTT/4.10s/Tow Pkg/Mopar-Rusty's-Skid Row skids&sliders/OME struts&springs/Rancho shocks/Terraflex bumpstops/Landy FRH/Gen Steel/Grabber AT2s/Spidertrax/Rockcrusher/Hella/Smittybilt XRC8/Bulldog wiring/NAPA brakes/JBA UCAs&spacers/Deka Intimidator
Top
 Profile  
 
wildrussian
 Post subject:
PostPosted: Tue Oct 02, 2007 9:59 am 
Offline
LOST Member

Joined: Mon Jul 02, 2007 10:34 pm
Posts: 437
Location: Rocky Top Tennessee
Send Rusty an email at rusty@rustysoffroad.com he will tell you exactly what you need. he is pretty good at emailing back too.

_________________
05 Liberty 4x4, Atlantic Blue
Extended Breathers
3/4 Mopar Skids
OME Lift, 245/75/16 General Grabbers AT2, ProComp Extreme Alloys 7189
Mopar Tow Hooks
Top
 Profile  
 
Grape
 Post subject:
PostPosted: Tue Oct 02, 2007 10:43 am 
Offline
LOST Newbie
User avatar

Joined: Sun Jul 10, 2005 5:31 pm
Posts: 88
Location: St. Louis
You can call them as well. You can even ask to speak to rusty. If you happen to get Zach on the phone that is Rusty's Son he can help as well.

Phone: (256) 442-0607
Top
 Profile  
 
todaysrover
 Post subject: drill size
PostPosted: Wed Oct 03, 2007 1:25 am 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Apr 25, 2007 10:44 pm
Posts: 6
Location: AMERICAN CANYON,CA
Self tapers, no pre-drilling, I used an 18 volt ryobi impact, they went right in. hope this helps
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KJ 4X4 Discussion---2002-2007 Liberty Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management