yes, pound over the pinch weld and you should be fine, maybe
some trimming in front , some have to others dont depends on the tires you choose, like BFGs are a wide square tire
tom
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tire size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=25006 |
Page 1 of 1 |
| Author: | Bodz123 [ Wed Oct 03, 2007 2:56 pm ] |
| Post subject: | Tire size |
I will be installing a 2" ome lift on my liberty and I'm also due for new tires. Can I fit a 255/70/16 without any rubbing issuses? the tire is 30.1" tall and 10.3" wide tread according to tirerack. |
|
| Author: | tommudd [ Wed Oct 03, 2007 3:11 pm ] |
| Post subject: | |
yes, pound over the pinch weld and you should be fine, maybe some trimming in front , some have to others dont depends on the tires you choose, like BFGs are a wide square tire
tom |
|
| Author: | Bodz123 [ Wed Oct 03, 2007 3:12 pm ] |
| Post subject: | |
I'll be going with the bridgestone dueller A/T revo's |
|
| Author: | Freshmud [ Wed Oct 03, 2007 5:36 pm ] |
| Post subject: | |
how do i fix the pinch weld issue |
|
| Author: | Bodz123 [ Wed Oct 03, 2007 6:18 pm ] |
| Post subject: | |
good question, I dont even know what the pinch weld is :shock: but i figured id just "fix" anything with a clearance issue |
|
| Author: | ATXKJ [ Wed Oct 03, 2007 9:14 pm ] |
| Post subject: | |
The wheel well behind the front tire - there's a plastic liner sticking out - underneath the liner is a seam where 2 body panels are welded - you need to bend it, not cut it off - it holds body panels together. Tokojoe's writeup http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=7690&highlight=pinch+weld Moose's pictures 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|