LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Front axle(CV) assemblies
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=26184		 Page 1 of 1
Author:  jake105 [ Sun Nov 04, 2007 8:05 pm ]
Post subject:  Front axle(CV) assemblies
What are some of the members replacing their front axle assemblies with? Is there a particular vendor or manufacturer you can recommend?
Thanks.
Author:  RespectMyLibertay [ Sun Nov 04, 2007 9:41 pm ]
Post subject: 
Check Ebay. One vendor is selling them for $90 each ($15 shipping) and you can save on shipping if you buy them both. I just got one but haven't put it in yet. It has a 2-year 20K mile warranty.
Author:  jason thompson [ Sun Nov 04, 2007 9:42 pm ]
Post subject:  Re: Front axle(CV) assemblies
jake105 wrote:
What are some of the members replacing their front axle assemblies with? Is there a particular vendor or manufacturer you can recommend?
Thanks.



IMO
Just get the OE remanufactured ones they sell at any auto parts store but get it with the life time warranty
then do what you will to them
to much lift causes the CV's to bind and weare out to fast? so what swap them out yearly if you want
The guy at the parts counter only wants to know that you got it from them and you are in their computer
best part if it is a chain place carry the recipt in the glove box
Out wheelin 500 miles from home
snap a CV ,no biggie
run to town get a new shaft and replace
if you are there with some good freinds send them to get the new shaft while you pull the old shaft
if they dont have the shaft so what you pulled the shaft and can now drive home
Author:  tjkj2002 [ Sun Nov 04, 2007 10:32 pm ]
Post subject:  Re: Front axle(CV) assemblies
jake105 wrote:
What are some of the members replacing their front axle assemblies with? Is there a particular vendor or manufacturer you can recommend?
Thanks.
JE Reel makes some,just rebuild OEM one's with better boots,and there plentiful from places like Napa and such like jason thompson stated(rebuilt one's).DO NOT BUY FROM A DEALER they want over a $1000 for each CV shaft.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/