| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear Tail Lamp Protection? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=26296 |
Page 1 of 3 |
| Author: | Cobalt-60 [ Wed Nov 07, 2007 8:25 pm ] |
| Post subject: | Rear Tail Lamp Protection? |
Okay, we have all seen the cheapo (material certainly not price) stick-on Mopar tail lamp guards for the KJ. Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!! 
Or is it really necessary to have anything? Has anyone here actually broken a tail lamp off-road (and no I don't mean by backing into something that was just a stupid mistake)? |
|
| Author: | 2006KJSPORT4x4 [ Wed Nov 07, 2007 8:30 pm ] |
| Post subject: | |
I know someone did on a Jeep Jambo run in West VA, caught it on a tree...W3CSX or something like that was his name, he has since bought a TJ I think though... |
|
| Author: | Pote [ Wed Nov 07, 2007 8:59 pm ] |
| Post subject: | |
well at least you're covered for a 2006 KJ.... http://www.autoanything.com/generic_pag ... &g_id=3182 the specs: http://www.autoanything.com/grille-guar ... c=MERCSHOP |
|
| Author: | Cobalt-60 [ Thu Nov 08, 2007 8:01 am ] |
| Post subject: | |
Pote wrote: well at least you're covered for a 2006 KJ....
http://www.autoanything.com/generic_pag ... &g_id=3182 the specs: http://www.autoanything.com/grille-guar ... c=MERCSHOP Better, but you are still talking about something that basically adhears to the plastic lamp housing itself with 3M tape. It gets hit and it is still going to transfer the shock to the plastic housing. Everything I have seen is advertised with "easy to install 3M tape". I'd rather have something that was actually secured to a bracket somewhere. Though I have had a lamp out to replace a break light bulb, and I'll be the first to admit, there isn't much there. 
|
|
| Author: | bugnout [ Thu Nov 08, 2007 11:11 am ] |
| Post subject: | |
A metal bolt on braket runs the risk of bending sheet metal if you hit something with it. IMHO its cheaper just to replace the lens if it gets damaged. I think they are about $50 on ebay. I've seen some going for as low as $25. |
|
| Author: | Cobalt-60 [ Thu Nov 08, 2007 11:42 am ] |
| Post subject: | |
bugnout wrote: A metal bolt on braket runs the risk of bending sheet metal if you hit something with it.
IMHO its cheaper just to replace the lens if it gets damaged. I think they are about $50 on ebay. I've seen some going for as low as $25. Oh, I actually agree with you on this. I guess I was just hoping that someone had found some nifty way to secure to someting structural under the sheet metal that could actually absorb the shock. The sheet metal isself is way too thin and screws would just rip right out of it!!! 
Just a "what if" mental exercise, anyway. 
|
|
| Author: | dog_party [ Thu Nov 08, 2007 11:45 am ] |
| Post subject: | |
I looked at those metal tail-lamp "guards." But for the price you pay for them, you can armor half of the underside of your Jeep. I say just smash, replace, repeat. It'd take 5 or 6 $25 replaced taillights to equal the price of a set of metal "guards" anyway. |
|
| Author: | Rock Lizard [ Thu Nov 08, 2007 12:05 pm ] |
| Post subject: | Re: Rear Tail Lamp Protection? |
Cobolt-60 wrote: Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!!
Yes.
|
|
| Author: | WoodysKJ [ Thu Nov 08, 2007 12:45 pm ] |
| Post subject: | Re: Rear Tail Lamp Protection? |
Rock Lizard wrote: Cobolt-60 wrote: Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!! Yes. Marty, Care to elaborate on this a little? |
|
| Author: | Rock Lizard [ Thu Nov 08, 2007 3:10 pm ] |
| Post subject: | Re: Rear Tail Lamp Protection? |
WoodysKJ wrote: Rock Lizard wrote: Cobolt-60 wrote: Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!! Yes. Marty, Care to elaborate on this a little? Classified Secret Product.
|
|
| Author: | WoodysKJ [ Thu Nov 08, 2007 3:28 pm ] |
| Post subject: | |
not classified any more. That's what I needed to know. Might as well put me down for a pair. |
|
| Author: | ed. [ Thu Nov 08, 2007 7:18 pm ] |
| Post subject: | Re: Rear Tail Lamp Protection? |
Rock Lizard wrote: WoodysKJ wrote: Rock Lizard wrote: Cobolt-60 wrote: Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!! Yes. Marty, Care to elaborate on this a little? Classified Secret Product. Woooooooooooooooo.... LED lights in a metal case? 
|
|
| Author: | Rock Lizard [ Thu Nov 08, 2007 7:40 pm ] |
| Post subject: | Re: Rear Tail Lamp Protection? |
ed. wrote: Rock Lizard wrote: WoodysKJ wrote: Rock Lizard wrote: Cobolt-60 wrote: Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!! Yes. Marty, Care to elaborate on this a little? Classified Secret Product. Woooooooooooooooo.... LED lights in a metal case? Um....
|
|
| Author: | 1stTimeJeeper [ Fri Nov 09, 2007 3:17 am ] |
| Post subject: | Steel Guards! |
Hey guys, found some steel guards while browsing some pics on google. check it out and tell me what you think! http://images.google.com/imgres?imgurl= ... n%26sa%3DN Hope it helps!
|
|
| Author: | WoodysKJ [ Fri Nov 09, 2007 7:02 am ] |
| Post subject: | |
Look great if you drive a HUMMER! If i buy something I want to see it like it will be on my KJ. I wont deal with a company that shows only one size fits all mentality, Sound familar, 0311-DOC and Trail Ready? |
|
| Author: | Cobalt-60 [ Fri Nov 09, 2007 8:31 am ] |
| Post subject: | Re: Rear Tail Lamp Protection? |
ed. wrote: Rock Lizard wrote: WoodysKJ wrote: Rock Lizard wrote: Cobolt-60 wrote: Has anybody come up with a better solution made out of something like, oh, I don't know,... METAL!!! Yes. Marty, Care to elaborate on this a little? Classified Secret Product. Woooooooooooooooo.... LED lights in a metal case? Wait, are we talking about a Jeep or a Euro Tuner???
|
|
| Author: | DryBones [ Sat Nov 10, 2007 10:25 am ] |
| Post subject: | |
check out item# 260180916459 on eBay. clamp to the light assembly not stick on. |
|
| Author: | riptricket [ Sat Nov 10, 2007 11:29 am ] |
| Post subject: | |
i have seen those before, and they don't have as much flow and curvaciousness as the manik... but if you like them and are getting them!!! take lotsa pics! |
|
| Author: | DryBones [ Sat Nov 10, 2007 2:03 pm ] |
| Post subject: | |
form and function over plastic cosmetics any time. 
|
|
| Author: | Cobalt-60 [ Sat Nov 10, 2007 8:55 pm ] |
| Post subject: | |
DryBones wrote: form and function over plastic cosmetics any time.
Got that right. Let us know how they work. 
|
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
