LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rusty's rear lower control arms
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=27643
Page 1 of 1

Author:  fdems [ Tue Dec 18, 2007 9:25 am ]
Post subject:  Rusty's rear lower control arms

Just curious, putting my lift package together. Is it worth it to upgrade the RLCA's ? appreciate your opinions!

http://rustysoffroad.com/mm5/merchant.m ... _Code=ARMS

Author:  Squintz Palladoris [ Tue Dec 18, 2007 11:48 am ]
Post subject: 

They look nice but they are non adjustable. Not much of an advantage.

Al has some nice adjustable control arms that are a bit more spendy. But they are adjustable.
http://jeepinbyal.com/detail.aspx?ID=464

He also has brackets that you can adjust the pinion angle with as well as relieve some stress off the rear Y-Link ball joint.
http://jeepinbyal.com/detail.aspx?ID=463

Brad

Author:  jeepkj02 [ Tue Dec 18, 2007 12:00 pm ]
Post subject: 

Squintz Palladoris wrote:
They look nice but they are non adjustable. Not much of an advantage.

Al has some nice adjustable control arms that are a bit more spendy. But they are adjustable.
http://jeepinbyal.com/detail.aspx?ID=464

He also has brackets that you can adjust the pinion angle with as well as relieve some stress off the rear Y-Link ball joint.
http://jeepinbyal.com/detail.aspx?ID=463

Brad


Those are for his 4" lift. Doesn't work for 2.5" lifts. Some guys on here run LCA for the TJ Wrangler.

Author:  Jeepjeepster [ Tue Dec 18, 2007 12:05 pm ]
Post subject: 

They are not needed.

Author:  fdems [ Tue Dec 18, 2007 12:43 pm ]
Post subject: 

thanks, appreciate your comments. They offer them for the 2.5 lift and was just wondering if it enhances or strengthens the suspension better than stock. I'll call RUSTY'S but just wanted your opinions. Take care

Author:  Squintz Palladoris [ Wed Dec 19, 2007 2:25 pm ]
Post subject: 

jeepkj02 wrote:

Those are for his 4" lift. Doesn't work for 2.5" lifts. Some guys on here run LCA for the TJ Wrangler.


Unless they are LONGER than stock when adjusted all the way short. They will work. They are adjustable. They are recommended for a 4" lift because they are needed to move the tire back in the wheel well with that much lift.

If they are Longer than stock please let me know.

Brad

Author:  ARBSeth [ Wed Dec 19, 2007 3:32 pm ]
Post subject: 

I have a set of Rubicon Arms with the Superflex joint that have never been installed I'd sell you for a good deal...
Drop me a line.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/