| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rusty 3/4 spacer http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=2845 |
Page 1 of 1 |
| Author: | KJRenny [ Wed Oct 19, 2005 10:56 pm ] |
| Post subject: | Rusty 3/4 spacer |
For my first post I will be asking if anyone has the Rusty 3/4 front spacer. Some say it is actually 1.5 inch lift... so I called them and they say it will raise it 3/4 at the fenders... which will level the stock suspension perfect. So I ordered it in hopes that it will be 3/4. If not, I guess it'll be up for sale. |
|
| Author: | the1jferg [ Wed Oct 19, 2005 11:24 pm ] |
| Post subject: | level |
You have to install these too, if you want to level the front because the back it between an 1 1/4" to 1 1/2" higher. http://rustysoffroad.com/Merchant2/merc ... sus_kj_par |
|
| Author: | KJRenny [ Thu Oct 20, 2005 8:45 am ] |
| Post subject: | |
hmm, my rear is only 3/4 higher than the front |
|
| Author: | Eddo [ Thu Oct 20, 2005 9:43 am ] |
| Post subject: | Re: Rusty 3/4 spacer |
KJRenny wrote: For my first post I will be asking if anyone has the Rusty 3/4 front spacer. Some say it is actually 1.5 inch lift... so I called them and they say it will raise it 3/4 at the fenders... which will level the stock suspension perfect. So I ordered it in hopes that it will be 3/4. If not, I guess it'll be up for sale.
The 3/4" spacer is identical to the 1.5" lift daystar spacer. I have a set sitting in my garage. |
|
| Author: | the1jferg [ Thu Oct 20, 2005 10:18 am ] |
| Post subject: | ??? |
So, how much lift does a 3/4" spacer really give? I guess every KJ nose down hieght is a little diff. if yours is 3/4" thats great. Eddo, you selling the spacers? |
|
| Author: | Eddo [ Thu Oct 20, 2005 1:56 pm ] |
| Post subject: | |
Well they look identical to the Daystar 1.5" lift spacers so I assume 1.5" of lift. I'm not sure where they got 3/4" from since they measure more like 1-1.25" larger than the stock spring issolaters. I am selling them, but they are temporarly on hold for someone else. If the deal falls through I will PM you. |
|
| Author: | KJRenny [ Sat Oct 22, 2005 5:14 pm ] |
| Post subject: | |
the1jferg, mine might be for sale, I'll have to see when they come in, I only want 3/4 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|