| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| dealer problems ( resloved!! details pg2) http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=28778 |
Page 1 of 2 |
| Author: | dloc_jeep_KJ [ Mon Jan 21, 2008 6:21 pm ] |
| Post subject: | dealer problems ( resloved!! details pg2) |
so i took my jeep to have the ball joint replaced today and got a call 2 hrs later letting me know that they had messed up the hub nut.. i couldnt believe this. i didnt even think that the hub had to come off to fix that. the part that really got me upset though was that they actually blamed this on ME???? they said it was my fault since i take it off road so much. first how do they know how much i go off road ( i do go every week |
|
| Author: | jsc7002 [ Mon Jan 21, 2008 6:30 pm ] |
| Post subject: | |
that sucks man, sorry, some dealers are just crappy like that though and some arent |
|
| Author: | Jeep4me99 [ Mon Jan 21, 2008 6:32 pm ] |
| Post subject: | |
that bullsh** they better not make you pay. they must have tried really hard to bust that hub nut |
|
| Author: | tommudd [ Mon Jan 21, 2008 6:32 pm ] |
| Post subject: | |
Man that is crazy for sure, some idiot in the back screws up something and the customer is expected to pay! So they did not do anything at all? I do all my own work as well, so I dont end up in these same things. Good Luck is all I can say, its in no way your fault, just due to you going off road some. |
|
| Author: | dloc_jeep_KJ [ Mon Jan 21, 2008 6:36 pm ] |
| Post subject: | |
so does the hub have to come off to change the lower ball joint?? i think i could do it with out taking that off. maybe im way wrong though im still a little red in the face after this and all my other bad luck with my jeep this week. |
|
| Author: | KJ04 [ Mon Jan 21, 2008 8:09 pm ] |
| Post subject: | |
It seems like if you didn't have bad luck, you wouldn't have any luck at all. |
|
| Author: | Guest [ Mon Jan 21, 2008 8:56 pm ] |
| Post subject: | |
I haven't done KJ balljoints, but in a lot of IFS 4x4s you have to take the nut that holds the CV inside the hub assembly loose to have enough room to work the balljoint in. When I had mine apart, it seemed like it'd have enough travel to do it without taking the CV nut off, but again...I haven't done KJ balljoints. if THEY f'd up your hub nut, tell them "fix it, you broke it" |
|
| Author: | dloc_jeep_KJ [ Mon Jan 21, 2008 9:23 pm ] |
| Post subject: | |
yeah im not taking any money/checks/cards with me tomorrow. i am not going to pay them for something they messed up. it just seemed like that was what they were going to do by blaming it on me for going off road in it. i have gotten very poor customer service everytime i have had to deal with this dealer. wether it be the part dep. or the service dep. they have always been VERY RUDE to me. i think this place is one of those shops that tries to squeeze every dime they can out of u. i wont be paying anything though and i kinda figured this was going to happen. also i think they could just be buying theirselves some time. they could just not have had time to do it and lied to me i dont know but anyways i wont be buying the wife's Commander from them next winter thats for sure!!! |
|
| Author: | tommudd [ Mon Jan 21, 2008 9:40 pm ] |
| Post subject: | |
Not sure how they do it at the dealers, I took mine apart myself and just took the knuckle to the local shop and they pressed it in and out. Yes I would go with no money at all, say just give me the keys and leave! |
|
| Author: | dloc_jeep_KJ [ Mon Jan 21, 2008 9:47 pm ] |
| Post subject: | |
tommudd wrote: Not sure how they do it at the dealers, I took mine apart myself and just took the knuckle to the local shop and they pressed it in and out.
Yes I would go with no money at all, say just give me the keys and leave! |
|
| Author: | Jeepjeepster [ Mon Jan 21, 2008 10:10 pm ] |
| Post subject: | |
Gotta take the entire knuckle off, so yes, the hub nut must come off. I did mine myself and used moogs for that exact reason. Im worried Ill kill someone at the dealer. |
|
| Author: | 06KJLimited [ Tue Jan 22, 2008 1:49 am ] |
| Post subject: | |
Report them to the Better Business Bureau http://welcome.bbb.org/ |
|
| Author: | 501 [ Tue Jan 22, 2008 2:07 am ] |
| Post subject: | |
06KJLimited wrote:
x2, Also report them to Jeep HQ, I'm sure with a little searching on the internet, you could find an email address or a phone number for Jeep HQ to report dealership problems. |
|
| Author: | dloc_jeep_KJ [ Tue Jan 22, 2008 2:18 am ] |
| Post subject: | |
ok so i dont know if i will go that far. even if i did it still wont get me my jeep back any faster or get me to school in the morning and thats all i really want. oh and maybe not to be blamed for the screw ups. i am not going to let them waste any more of my time on this. |
|
| Author: | AbsoluteRenegade [ Tue Jan 22, 2008 2:28 am ] |
| Post subject: | |
I'm 10mins from 3 Jeep dealerships, I like that I have a choice to what idiot I'm going to for what |
|
| Author: | dloc_jeep_KJ [ Tue Jan 22, 2008 2:38 am ] |
| Post subject: | |
AbsoluteRenegade wrote: I'm 10mins from 3 Jeep dealerships, I like that I have a choice to what idiot I'm going to for what
must be nice. my jeep dealership HATES lifts. everytime im there they have somthing negative to say about it. i just dont understand it one bit. its a Jeep for Gods sake! what do they expect? maybe i expect the wrong thing?? then again never have i been there and seen a dirty Jeep. maybe thats my sign i should just stay away!!! maybe they are just made at me cause i brought in all the mud from last weekends wheeling trip into there clean shop |
|
| Author: | corwyyn [ Tue Jan 22, 2008 2:45 am ] |
| Post subject: | |
Just to alleviate some of the frustration you're not the first person that something like this has happened to: Damaged axle threads with ball joint recall. Hope you get it resolved ASAP. |
|
| Author: | dloc_jeep_KJ [ Tue Jan 22, 2008 3:08 am ] |
| Post subject: | |
corwyyn wrote: Just to alleviate some of the frustration you're not the first person that something like this has happened to: Damaged axle threads with ball joint recall.
Hope you get it resolved ASAP. thank u very much for that link. wow i cant believe he payed. well in my case they did say "they" striped it out. but they also blamed the fact on me cause it was rusted and i caused it by going off road. i think mine is just the nut itself nothing more. i will not pay a dime though i dont care what they say. i wish i would have recorded that phone call though |
|
| Author: | Rush345 [ Tue Jan 22, 2008 6:34 am ] |
| Post subject: | I agree 100% |
Don't take their abuse if you do they win, If you act like a wimp and allow them to abuse you then they continue to treat you as a wimp because you allow it. Don't be a door mat, If you let them then don't come whining about it . Don't mean to spank you , but I have met many who complain how they are treated but do nothing about it. Remember the squeeky wheel gets the greese, so stand tall and go for it go to upper management and make your voice be heard. More often then not they don't know what is going on in the lower ranks. Once they hear things change try that first then if not satisfied check with your local radio or TV for a consumer advacate. The Stealerships hate bad press so try to play nice and if that doesn't work play dirty!!!! |
|
| Author: | wildrussian [ Tue Jan 22, 2008 8:35 am ] |
| Post subject: | |
Did you pick it up yet? Which dealership did you take it to? I hope it wasn't Rice, cause they suck! |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|